Триммеры Ryobi RFT254 5133002173 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
12
EN
FR
DE
ES
IT
PT
NL
SV
DA
NO
FI
HU
CS
RU
RO
PL
SL
HR
ET
LT
LV
SK
BG
English (Original instructions)
Ŷ
Walk, never run.
Ŷ
Work across the face of slopes, never up and down.
Exercise extreme caution when changing direction on
slopes.
Ŷ
Do not use the product near drop-offs, ditches,
excessively steep slopes, or embankments. Poor
footing could cause a slip and fall accident.
Ŷ
Do not operate the machine in wet grass or in the rain.
Ŷ
Check all nuts, bolts, and screws at frequent intervals
for proper tightness to be sure the equipment is in safe
working condition.
Ŷ
Replace worn or damaged parts before operating the
product.
Ŷ
Do not force the product. It will do the job better and
safer at the speed for which it was designed.
Ŷ
Do not pull the product backward unless absolutely
necessary. If you must back the machine away from a
wall or obstruction, first look down and behind to avoid
tripping or pulling the machine over your feet.
Ŷ
Stop the cutting means if the product has to be tilted
for transportation when crossing surfaces other than
grass, and when transporting the product to and from
the working area.
Ŷ
Do not tilt the product while the engine is running.
Ŷ
Start the engine carefully according to instructions and
keep hands and feet away from cutting area.
Ŷ
Never pick up or carry the product while it is running.
Ŷ
To reduce the risk of injury associated with contacting
rotating parts, always stop the engine, remove the
spark plug wire and make sure all moving parts have
been come to a stop before:
Ɣ
leaving the product unattended
Ɣ
cleaning or clearing a blockage
Ɣ
checking, maintenance or working on the machine
Ɣ
After striking a foreign object, inspect the product
for damage and make repairs as necessary
Ɣ
If the machine is dropped, suffers heavy impact
or begins to vibrate abnormally, immediately stop
the machine and inspect for damage or identify the
cause of the vibration.
Ɣ
refuelling.
Ŷ
Before using, always visually inspect to see that the
cutting elements and cutting means are not worn or
damaged.
INTENDED USE
The product is only intended for use outdoors in a well
ventilated area.
The product is designed for cutting grass, light weeds
and other similar vegetation at or about ground level.
The cutting plane should be approximately parallel to the
ground surface.
The product is designed for two handed operation where
the operator walks behind the handlebar pushing the unit
forwards with both wheels in contact with the ground.
RESIDUAL RISKS
Even when the machine is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and
the operator should pay special attention to avoid the
following:
Ŷ
Injury caused by vibration. Always use the right tool for
the job, use designated handles and restrict working
time and exposure.
Ŷ
Exposure to noise can cause hearing injury. Wear ear
protection and limit exposure
Ŷ
Injury from thrown or flying objects. Operate from
behind the handlebar and wear adequate eye
protection.
RISK REDUCTION
It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud’s Syndrome
in certain individuals. Symptoms may include tingling,
QXPEQHVV DQG EODQFKLQJ RI WKH ¿QJHUV XVXDOO\ DSSDUHQW
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices
are all thought to contribute to the development of these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
Ŷ
Keep your body warm in cold weather. When operating
the unit wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud’s Syndrome.
Ŷ
After each period of operation, exercise to increase
blood circulation.
Ŷ
Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician about
these symptoms.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged
periods, ensure you take regular breaks.
