Daikin AHQ-C - Инструкция по эксплуатации - Страница 6

1-4

Figure B

10.0mm or less

Please ensure that the following steps are taken:

Unit installation should be tilted at least 10mm as recommended in Figure B.
The drain pipe slope shall be kept at least 1:100.
Provide clearance for easy servicing and optimal air flow as shown in Figure C.
The indoor unit must be installed such that there is no short circuit of the cool discharge air with the warm return air.
Do not install the indoor unit where there is direct sunlight shining on the unit. The location should be suitable for piping 
and drainage installation. The unit must be a large distance away from the door.

•
•
•
•
•

10.0mm or more

Figure C

1m or more

400mm or more

Floor Standing Type

Utensils, furnitures or built-in 

architectural features must not 
protrude more than 250mm

Drainage Pipe

250mm or less

300mm 

(Min.)

500mm or more

10mm

Indoor Unit

Hanger Bracket

Nut

Washer

Washer

Nut

Floor

2300mm or more

Ceiling

1 IM 5CEY-0711(1)-EN-Siesta.indd4   4

1 IM 5CEY-0711(1)-EN-Siesta.indd4   4

4/3/13   3:25:52 PM

4/3/13   3:25:52 PM