Daikin FWP-AT - Инструкция по эксплуатации - Страница 41

EN

9

OPERATION MANUAL

It is strictly forbidden to reproduce this manual, even par tially

FC66003946

Rev 00

Controller for units

FWECSA

ADJUSTMENT MENU

DESCRIPTION

DEFAULT

Minimum cooling SET limit

10.0 °C

Maximum cooling SET limit

35.0 °C

Minimum heating SET limit

5.0 °C

Maximum heating SET limit

30.0 °C

Minimum humidity SET limit 

35%

Maximum humidity SET limit

75%

Humidity hysteresis

5%

Offset on humidity reading

0%

Minimum value of modulating ventilation

20%

Maximum value of modulating ventilation

100%

Air probe offset

0.0 °C

Water probe offset

0.0 °C

Heating water probe offset

0.0 °C

Economy Hysteresis

2.5 °C

Cooling water consent SET

22.0 °C

Cooling water consent hysteresis 

5.0 °C

Heating water consent SET

30.0 °C

Heating water consent hysteresis

7.0 °C

Dehumidification water consent SET

10.0 °C

Dehumidification water consent hysteresis

2.0°C

Valve water consent SET

30 °C

Valve water consent hysteresis

5.0 °C

Heater water consent SET

39.0 °C

Heater water consent hysteresis

2.0 °C

Temperature minimum control SET

9.0 °C

Temperature minimum control hysteresis

1.0 °C

Neutral zone

5.0 °C

Modulating ventilation % in standby 20%

20%

Default values RESET

No

SETUP MENU

From the main display, press the UP/DOWN keys to view the 
following pages in this order:

• 

Turning Economy function on

• 

Enabling electrical heater use

• 

Turning temperature minimum control on

• 

Turning humidity control on

• 

Humidity setpoint

If it is not possible to access editing of one or more entries, 
you will need to preventively set the relative configuration 
parameters. For example, to enable electric heater operation 
you will need to preventively set it up in the configuration 
parameters menu.

Some parameters (or possible values) in the 
configuration, regulation and setup menus may 
not be accessible based on which parameter 
setting is selected.