Omron HBP-1100 - Инструкция по эксплуатации - Страница 7

5

EN

 Caution

•  Before using the unit, verify that none of the following apply to the 

patient:

-  Poor peripheral circulation, noticeably low blood pressure, or low body 

temperature (there will be low blood flow to the measurement position)

-  The patient uses an artificial heart and lung (there will be no pulse)

-  An SpO

2

 sensor and the cuff are attached to the same arm

-  The patient has an aneurysm

-  The patient has frequent arrhythmia

-  Body motions such as convulsions, arterial pulsations, or trembling 

(cardiac massage in progress, minute continuous vibrations, 

rheumatism, etc.)

•  Before use, visually inspect the unit to make sure there are no 

deformations due to falling, and that there is no dirt or moisture on the 

unit.

•  When the unit has not been used for an extended period of time, always 

verify that it operates normally and safely before use.

•  Do not use in a location where the unit may easily fall. In the event that 

the unit falls, verify that it operates normally and safely.

Cleaning

 Warning

•  When cleaning the unit, turn off the power and disconnect the AC 

adapter from the unit.

•  After cleaning the unit, make sure it is completely dry before connecting 

to a power outlet.

•  Do not spray, pour, or spill liquids into or onto the unit, accessories, 

connectors, buttons, or openings in the housing.

 Caution

•  Do not use thinner, benzene, or other solvents to clean the unit.

•  Do not sterilize by autoclave or gas sterilization (EOG, formaldehyde 

gas, high-concentration ozone, etc.).

•  If using an antiseptic solution for cleaning, follow the instructions of the 

manufacturer.

•  Clean the unit regularly.