Omron HBP-1100 - Инструкция по эксплуатации - Страница 25

23

EN

Maintenance

Maintenance Inspection and Safety Management

The HBP-1100 must be maintained to ensure functionality and to secure the 

safety of patients and operators.

Daily checks and maintenanc e should be per formed by the operator.In 

addition, qualified personnel are necessar y to maintain the per formance 

and the safety, and to conduct periodic inspections. We recommend that the 

verification test be performed at least once a year.

Cleaning of the Device

Cleaning and disinfecting should be per formed in accordance with your 

facility’s infection control practice.

Wipe with a cloth that has been moistened with isopropyl alcohol diluted to 

50 v/v%, or ethyl alcohol (disinfection alcohol) diluted to 80 v/v% or less and 

wrung out.

Do not wipe the Power connector or allow it to become wet.

Use a moistened cotton bud to remove dust that has accumulated on the vent 

ports.

The device requires no routine ser vice other than cleaning, and visually 

checking the cuffs, tubing, etc.

 Caution

•  Do not sterilize by autoclave or gas sterilization (EOG, formaldehyde gas, 

high-concentration ozone, etc.).

•  If using an antiseptic solution for cleaning, follow the instructions of the 

manufacturer.

Accessory Care

Non-Invasive Blood Pressure (NIBP) Measurement

Cuff/Cuff tube

Wipe clean on the surface of the cuff with a cloth moistened with a 70  v/v% 

dilution of isopropyl alcohol, or a 80 v/v% or less dilution of disinfection 

ethanol (ethyl alcohol).

Do not allow any liquids inside the cuff. If a liquid gets in the cuff, dry the 

inside well.