Omron HBP-1100 - Инструкция по эксплуатации - Страница 26

24

Check before Use

Before turning on the power

Before turning on the power, check for the following

■  External appearance

•  The device or accessories are not deformed due to falling or other 

impact.

•  The device is not dirty.

•  The device is not wet.

■  AC adapter

•  The AC adapter is firmly connected to the connector on the 

device.

•  There are no heavy objects lying on the AC adapter cable.

•  The AC adapter cable is not damaged (core-wire exposure, breaks, etc.).

When turning on the power

When you turn on the power, check the 

LCD display.

•  When the [START/STOP] or [Power 

ON/OFF] button is pressed to turn on 

the power, the right screen appears.

After turning on the power

After turning on the power, check for the following

■  External appearance

•  There is no smoke or odor coming from the device.

•  The device is not making any unusual noises.

■  Buttons

•  Press each button and check that it works.

■  Non-invasive blood pressure (NIBP)

•  Make sure that a suitable OMRON GS CUFF is attached (one that fits 

the circumference of the patient’s arm).

•  The cuff tube is firmly connected.

•  The person checking the cuff should wrap the cuff around arm, 

perform cuff measurement and check to see that blood pressure is in 

the vicinity of normal measurements.

•  While measurement is in progress, intentionally activate “Body 

movement detection function” to halt discharge by bending the relevant 

arm and move body and during this halt check that cuff pressure does 

not drop.