Omron HBP-1100 - Инструкция по эксплуатации - Страница 22

20

Measurement in “Auscultation Mode”

In “Auscultation Mode”, this device does not measure blood 

pressure.Measurement should be performed by a health care 

professional using a stethoscope.

The healthcare professional uses a stethoscope to determine SYS 

and DIA by means of the auscultation method.
1. Make sure the power is on.

“0” is displayed.

2. Press the [Auscultation] button.

The auscultation icon appears and the 

device enters “Auscultation Mode”.

3. Press the [START/STOP] button.

Inflation starts. When the cuff 

is sufficiently inflated, deflation 

automatically starts.

4. At the SYS point that you determine by auscultation, press the 

[Auscultation] button.

The first time you press the [Auscultation] button, the SYS value 

appears.

5. At the DIA point that you determine by auscultation, press the 

[Auscultation] button.

The second time you press the [Auscultation] button, the DIA value 

appears and the cuff rapidly deflates.

Manual inflation in “Auscultation Mode”

If the cuff is not inflated sufficiently or you want to re-inflate, you can 

inflate the cuff manually.

Hold down the [START/STOP] button during inflation or deflation to 

inflate continuously.

“-” appears below the value to indicate that manual inflation is in 

progress.