Omron HBP-1100 - Инструкция по эксплуатации - Страница 17

15

EN

Applying the Cuff to the Patient

The device can be used on either 

the right or left arm.

Wrap the cuff on a bare arm or 

over thin clothing. Thick clothing 

or a rolled up sleeve will cause 

inaccurate blood pressure 

measurements.

1. Make sure the cuff tube is not bent.

The cuff tube should be on the peripheral side.

2. Wrap the cuff so that the INDEX ARTERY “ ” is directly over 

the brachial artery.

The brachial artery is on the inner side of the patient’s upper arm.

1 to 2 cm

Make sure that the INDEX ARTERY “ ” is within the range. If outside 

the 

 range, there will be greater error in the blood 

pressure value. In this case, use the appropriate cuff size.

*  Attach the cuff so that the bottom edge is 1 to 2 cm from the inner 

side of the elbow joint.

*  The  cuff should be wrapped to a tightness that roughly allows two 

fingers to be inserted under the cuff.

3. During measurement, keep the brachial artery on which the cuff 

is wrapped at the same height as the right atrium of the heart.