Omron HBP-1100 - Инструкция по эксплуатации - Страница 28

26

Troubleshooting

The power does not turn on

Cause

Solution

If the unit is being powered by the 

batteries, the batteries are not 

installed or depleted.

Insert batteries or replace with new 

batteries (page 13).

The AC adapter is disconnected.

Connect the AC adapter (page 13).

If the power does not turn on and the above is not the cause, turn off 

the unit power, disconnect the AC adapter, remove the batteries, and 

contact your OMRON retail dealer or distributor.

The unit display does not operate

Cause / solution
Stop using the unit and contact your OMRON retail dealer or distributor.

The unit becomes hot

Cause

Solution

An object is on top of the unit or 

right next to the unit.

Keep the area around the unit free 

of objects.

If the unit becomes too hot to be touched, there may be a problem in 

the unit. Turn off the unit power, disconnect the AC adapter, remove the 

batteries, and contact your OMRON retail dealer or distributor.

The cuff does not inflate when the [START/STOP] button is pressed

Cause

Solution

Loose cuff tube connection.

Check the connection.

There is an air leak in the cuff.

Replace the cuff.

If pressure is displayed, the cuff 

tube is bent.

Make sure no part of the cuff tube 

is bent.