Russell Hobbs 28270-56 - Инструкция по эксплуатации - Страница 8

8

RICE

1.  Plug in the appliance. The main control display will flash “----”. This indicates that the heat is off and the appliance is ready to be programmed.

2.  Add the rice according to the table and fit the glass lid.

3.  Press the 

Rice

 button.  The display will show “----”.

4.  Press the 

I/O

 button. The unit will beep once. The display will cycle through dashes. (- . . . ), (. - . .), (. . - .), (. . . -). This will continue to run through the 

entire cooking cycle. Keep the lid closed throughout the cooking cycle to ensure that the rices is cooked correctly.

5.  The rice is cooked when the temperature reaches approx. 105°C, the liquid in the pot has been absorbed by the rice, and the excess has boiled off. 

• 

When cooking has ended, the unit will automatically switch to the keep warm setting. The display will flash and start counting up from zero (00:00) 

to 4 hours (04:00).

• 

After the keep warm setting has been on for 4 hours, the unit will stop heating and return to the default display: “----”.

• 

Note

: Do not keep foods on the keep warm setting for more than 4 hours.

• 

Unplug the appliance when not in use and always allow it to completely cool before cleaning and storing.

6.  When finished, press the 

I/O

 button. 

7.  Unplug the appliance when not in use and always allow it to completely cool before cleaning and storing.

Tip

• 

Allow rice to rest on the keep warm settings for at least 15 minutes before serving.

Rice Cooking Chart

Rice (grams)

Water (ml)

Approx. number of servings

FOR WHITE RICE 

100

240

1-2

200

480

2-4

300

720

3-5

FOR BROWN RICE

100

320

1-2

200

640

2-4

300

960

3-5

• 

For other types of rice not listed in the cooking chart or when in doubt, follow the package directions.

BOIL

1.  Add water and ingredients and fit the glass lid. 

2.  Plug in the appliance. The main control display will flash “----”. This indicates that the heat is off and the appliance is ready to be programmed.

3.  Press the 

Boil

 button.  

4.  The default cooking time is 30 minutes. To adjust the cooking time, use the 

u

 and 

d 

buttons. The maximum cooking time is 2 hours. 

5.  Press the 

I/O

 button. The display will stop flashing and the cooking pot will start to heat up.

6.  When the temperature of the unit reaches 100°C, it will beep twice and the time will begin to count down. 

7.  When the cooking time has ended, the unit will stop heating and return to the default display: “----”.

• 

IMPORTANT: 

If you are making pasta, make sure that the water is boiling before adding the pasta.

KEEP WARM

• 

IMPORTANT: 

Do not use the Keep Warm setting to cook. Only use it to keep warm cooked food that is already hot.

1.  Start with already cooked and hot ingredients in the cooking pot, covered with the glass lid.

2.  Press the 

Keep Warm

 button.  

3.  Press the 

I/O

 button. 

• 

The display will start counting up from zero (00:00) to 4 hours (04:00).

• 

After the keep warm setting has been on for 4 hours, the unit will stop heating and return to the default display: “----”.

• 

Note

: Do not keep foods on the keep warm setting for more than 4 hours.

• 

Unplug the appliance when not in use and always allow it to completely cool before cleaning and storing.