Bosch AKE 30 LI 0.600.837.100 - Инструкция по эксплуатации - Страница 21

 English | 

21

Bosch Power Tools

F 016 L70 758 | (22.11.10)

c) Disconnect the plug from the power 

source and/or the battery pack from 
the power tool before making any ad-
justments, changing accessories, or 
storing power tools. 

Such preventive 

safety measures reduce the risk of 
starting the power tool accidentally.

d) Store idle power tools out of the reach 

of children and do not allow persons 
unfamiliar with the power tool or 
these instructions to operate the pow-
er tool. 

Power tools are dangerous in 

the hands of untrained users.

e) Maintain power tools. Check for mis-

alignment or binding of moving parts, 
breakage of parts and any other condi-
tion that may affect the power tool’s 
operation. If damaged, have the power 
tool repaired before use. 

Many acci-

dents are caused by poorly maintained 
power tools.

f) Keep cutting tools sharp and clean. 

Properly maintained cutting tools with 
sharp cutting edges are less likely to 
bind and are easier to control.

g) Use the power tool, accessories and 

tool bits etc. in accordance with these 
instructions, taking into account the 
working conditions and the work to be 
performed. 

Use of the power tool for 

operations different from those intend-
ed could result in a hazardous situation.

5) Battery tool use and care

a) Recharge only with the charger speci-

fied by the manufacturer. 

A charger 

that is suitable for one type of battery 
pack may create a risk of fire when used 
with another battery pack.

b) Use power tools only with specifically 

designated battery packs. 

Use of any 

other battery packs may create a risk of 
injury and fire.

c) When battery pack is not in use, keep 

it away from other metal objects, like 
paper clips, coins, keys, nails, screws 
or other small metal objects, that can 
make a connection from one terminal 
to another. 

Shorting the battery termi-

nals together may cause burns or a fire.

d) Under abusive conditions, liquid may 

be ejected from the battery; avoid con-
tact. If contact accidentally occurs, 
flush with water. If liquid contacts 
eyes, additionally seek medical help. 

Liquid ejected from the battery may 
cause irritation or burns.

6) Service

a) Have your power tool serviced by a 

qualified repair person using only 
identical replacement parts. 

This will 

ensure that the safety of the power tool 
is maintained.

Chain Saw Safety Warnings

f

Keep all parts of the body away from the 
saw chain when the motor is operating. 
Before you start the chain saw, make sure 
the saw chain is not contacting anything. 

A moment of inattention while operating 
chain saws may cause entanglement of 
your clothing or body with the saw chain.

f

Hold the power tool by insulated gripping 
surfaces only, because the saw chain may 
contact hidden wiring. 

Saw chains con-

tacting a “live” wire may make exposed 
metal parts of the power tool “live” and 
could give the operator an electric shock.

f

Always hold the chain saw with your right 
hand on the rear handle and your left 
hand on the front handle. 

Holding the 

chain saw with a reversed hand configura-
tion increases the risk of personal injury 
and should never be done.

f

Wear safety glasses and hearing protec-
tion. Further protective equipment for 
head, hands, legs and feet is recommend-
ed. 

Adequate protective clothing will re-

duce personal injury by flying debris or ac-
cidental contact with the saw chain.

f

Do not operate a chain saw in a tree. 

Op-

eration of a chain saw while up in a tree 
may result in personal injury.

f

Always keep proper footing and operate 
the chain saw only when standing on 
fixed, secure and level surface. 

Slippery 

or unstable surfaces such as ladders may 
cause a loss of balance or control of the 
chain saw.

f

When cutting a limb that is under tension 
be alert for spring back. 

When the tension 

in the wood fibres is released the spring 
loaded limb may strike the operator and/or 
throw the chain saw out of control.

f

Use extreme caution when cutting brush 
and saplings. 

The slender material may 

catch the saw chain and be whipped to-
ward you or pull you off balance.

f

Carry the chain saw by the front handle 
with the chain saw switched off and away 
from your body. When transporting or 
storing the chain saw, always fit the guide 
bar cover. 

Proper handling of the chain 

saw will reduce the likelihood of acciden-
tal contact with the moving saw chain.

f

Follow instructions for lubricating, chain 
tensioning and changing accessories. 

Im-

properly tensioned or lubricated chain may 
either break or increase the chance for 
kickback.

f

Keep handles dry, clean, and free from oil 
and grease. 

Greasy, oily handles are slip-

pery causing loss of control.

f

Cut wood only. Don’t use chain saw for 
purposes not intended. For example: do 
not use chain saw for cutting plastic, ma-
sonry or non-wood building materials. 

Use of the chain saw for operations differ-
ent than intended could result in a hazard-
ous situation.

Causes and operator prevention of kickback: 

–  Kickback may occur when the nose or tip of 

the guide bar touches an object, or when the 
wood closes in and pinches the saw chain in 
the cut.

–  Tip contact in some cases may cause a sud-

den reverse reaction, kicking the guide bar up 
and back towards the operator.

–  Pinching the saw chain along the top of the 

guide bar may push the guide bar rapidly back 
towards the operator.

–  Either of these reactions may cause you to 

lose control of the saw which could result in 
serious personal injury. Do not rely exclusively 

OBJ_BUCH-1275-002.book  Page 21  Monday, November 22, 2010  1:10 PM