Pioneer VSX-920 / VSX-1020 / VSX-1025 - Инструкция по эксплуатации - Страница 82

Controlling the rest of your system

09

82

En

With Pioneer components, you don’t need to 
program the power to switch off in a shutdown 

sequence (except DVD recorders).

5

Repeat steps 3 to 4 to program a 

sequence of up to five commands.

Programming mode will terminate 
automatically when the 5 commands are 

entered.

• If  you  press 

R.SETUP

 before programming 

is completed, commands programmed up 

to that point will be stored.

Using multi operations

1

Press MULTI OPERATION.

The LED flashes continuously.

2

Within five seconds, press an input 

function button that has been set up with a 
multi operation.

The receiver switches on (if it was in standby) 
and the programmed multi operation is 

performed automatically.

Using System off

1

Press MULTI OPERATION.

The LED flashes continuously.

2

Within five seconds, press 



 SOURCE.

The command sequence you programmed will 
run, then all Pioneer components will switch 

off

1

, followed by this receiver (switch of all the 

zones becomes off).

Erasing the settings for the multi-
operation

This erases all the settings programmed in the 
remote control for the multi-operation.

1

Press and hold R.SETUP, then press “8” 

for three seconds.

The LED flashes continuously.

• To cancel the preset setup mode press 

R.SETUP

.

2

Press the input function button 

containing the program you want to cancel or 
the 

 

SOURCE button for three seconds.

If the LED lights for one second, the erasing 
has been successfully completed.

Note

1 In order to avoid accidently switching off a DVD recorder that is currently recording, no DVD recorder power off codes 

are sent.

VSX-1020_SYXCN.book  82 ページ  

年

月

日　金曜日　午前９時

分