Усилители Pioneer VSX-920 / VSX-1020 / VSX-1025 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
The System Setup and Other Setup menus
11
105
En
English
Français
Deutsch
Nederlands
Italiano
Español
IP Address
The IP address to be entered must be defined
within the following ranges. If the IP address
defined is beyond the following ranges, you
cannot listen to Internet radio stations.
Class A: 10.0.0.1 to 10.255.255.254
Class B: 172.16.0.1 to 172.31.255.254
Class C: 192.168.0.1 to 192.168.255.254
Subnet Mask
In case an xDSL modem or a terminal adapter
is directly connected to this receiver, enter the
subnet mask provided by your ISP on paper. In
most cases, enter 255.255.255.0.
Default Gateway
In case a gateway (router) is connected to this
receiver, enter the corresponding IP address.
Primary DNS Server/Secondary DNS Server
In case there is only one DNS server address
provided by your ISP on paper, enter it in the
‘Primary DNS Server’
field. In case there are
more than two DNS server addresses, enter
one of the other DNS server addresses in the
‘Secondary DNS Server’
field.
Proxy Hostname/Proxy Port
This setting is required when you connect this
receiver to the Internet via a proxy server. Enter
the IP address of your proxy server in the
‘Proxy Hostname’
field. Also, enter the port
number of your proxy server in the
‘Proxy Port’
field.
Tip
• Press
/
or the numeric buttons to enter
alphanumeric characters. To delete
alphanumeric characters entered one at a
time, press
CLEAR
.
1
Select ‘IP Address, Proxy’ from the
Network Setup menu.
2
Select the DHCP setting you want.
When you select
ON
, the network is
automatically set up, and you do not need to
follow Steps 3. Proceed with Step 4.
If there is no DHCP server on the network and
you select
ON
, this receiver will use its own
Auto IP function to determine the IP address.
1
3
Enter the IP Address, Subnet Mask,
Default Gateway, Primary DNS Server and
Secondary DNS Server.
Press
/
to select a number and
/
to
move the cursor.
4
Select ‘OFF’ or ‘ON’ for the Enable Proxy
Server setting to deactivate or activate the
proxy server.
In case you select
‘OFF’
, proceed with Step 7.
In case you select
‘ON’
, on the other hand,
proceed with Step 5.
5
Enter the address of your proxy server or
the domain name.
6
Enter the port number of your proxy
server.
7
Select ‘OK’ to confirm the IP Address/
Proxy setup.
Checking the MAC address
You can check the MAC address.
•
Select ‘Information’ from the Network
Setup menu.
Note
1 The IP address determined by the Auto IP function is 169.254.X.X. You cannot listen to an Internet radio station if the
IP address is set for the Auto IP function.
VSX-1020_SYXCN.book 105 ページ
年
月
日 金曜日 午前９時
分
