Pioneer VSX-920 / VSX-1020 / VSX-1025 - Инструкция по эксплуатации - Страница 63

Control with HDMI function

07

63

En

English

Français

Deutsch

Nederlands

Italiano

Español

Chapter 7:

Control with HDMI function

Synchronized operations below with a 

Control

with HDMI-compatible Pioneer TV or Blu-ray 

disc player or with a component of another 

make that supports the 

Control

 with HDMI 

functions are possible when the component is 

connected to the receiver using an HDMI 

cable.

• The receiver’s volume can be set and the 

sound can be muted using the TV’s remote 

control.

• The receiver’s input switches over 

automatically when the TV’s channel is 

changed or a 

Control

 with HDMI-

compatible component is played.

• The receiver’s power is also set to standby, 

when the TV’s power is set to standby.

 Important

• With Pioneer devices, 

Control

 with HDMI 

functions are referred to as “KURO LINK”.

• You cannot use this function with 

components that do not support 

Control

with HDMI.

• We do not guarantee this receiver will work 

with Pioneer 

Control

 with HDMI-

compatible components or components of 

other makes that support the 

Control

 with 

HDMI function. We do not guarantee that 

all synchronized operations will work with 

components of other makes that support 
the 

Control

 with HDMI function.

• Use a High Speed HDMI

®

 cable when you 

want to use the 

Control

 with HDMI 

function. The 

Control

 with HDMI function 

may not work properly if a different type of 
HDMI cable is used.

• For details about concrete operations, 

settings, etc., refer to also the operating 
instructions for each component.

Making Control with HDMI 
connections

You can use synchronized operation for a 

connected TV and up to six (

VSX-1020/VSX-1025 

model:

 BD, HDMI 1 to 5 (front panel))/four 

(

VSX-920 model:

 BD, HDMI 1 to 3) other 

components.
Be sure to connect the TV’s audio cable to the 
audio input of this unit.
For details, see 

Connecting your TV and 

playback components

 on page 25.

 Important

• When connecting this system or changing 

connections, be sure to switch the power 
off and disconnect the power cord from 
the wall socket.

After completing all connections, connect 
the power cords to the wall socket.

• After this receiver is connected to an AC 

outlet, a 2 second to 10 second HDMI 

initialization process begins. You cannot 

carry out any operations during 

initialization. The HDMI indicator on the 

display unit blinks during initialization, 

and you can turn this receiver on once it 

has stopped blinking.

• To get the most out of this function, we 

recommend that you connect your HDMI 

component not to a TV but rather directly to 

the HDMI terminal on this receiver.

• While the receiver is equipped with six (

VSX-

1020/VSX-1025 model:

 BD, HDMI 1 to 5 

(front panel))/four (

VSX-920 model:

 BD, 

HDMI 1 to 3) HDMI inputs, the 

Control

with HDMI function can only be used with 

up to three DVD or Blu-ray disc players or 

up to three DVD or Blu-ray disc recorders.

VSX-1020_SYXCN.book  63 ページ  

年

月

日　金曜日　午前９時

分