Pioneer VSX-920 / VSX-1020 / VSX-1025 - Инструкция по эксплуатации - Страница 42

Basic Setup

04

42

En

The settings made in the Auto MCACC Setup 
should give you excellent surround sound from 

your system, but it is also possible to adjust 

these settings manually using 

The Advanced 

MCACC menu

 on page 86 or 

The System Setup 

and Other Setup menus

 on page 100.

1

Problems when using the Auto 
MCACC Setup 

If the room environment is not optimal for the 
Auto MCACC Setup (too much background 

noise, echo off the walls, obstacles blocking 

the speakers from the microphone) the final 
settings may be incorrect. Check for household 

appliances (air conditioner, fridge, fan, etc.), 
that may be affecting the environment and 
switch them off if necessary. If there are any 

instructions showing in the front panel display, 
please follow them.

• Some older TVs may interfere with the 

operation of the microphone. If this seems 

to be happening, switch off the TV when 

doing the Auto MCACC Setup.

The Input Setup menu

You only need to make settings in the 

Input 

Setup

 menu if you didn’t hook up your digital 

equipment according to the default settings 
(see 

Input function default and possible 

settings

 on page 43). In this case, you need to 

tell the receiver what equipment is hooked up 
to which terminal so the buttons on the remote 

control correspond to the components you’ve 
connected.

1

Switch on the receiver and your TV.

Use 



 RECEIVER

 to switch on.

2

Press 

 on the remote control, 

then press HOME MENU.

A Graphical User Interface (GUI) screen 

appears on your TV. Use 

///

 and 

ENTER

 to navigate through the screens and 

select menu items. Press 

RETURN

 to confirm 

and exit the current menu.

3

Select  ‘System Setup’ from the Home 

Menu.

4

Select  ‘Input Setup’ from the System 

Setup menu.

5

Select the input function that you want to 

set up.

The default names correspond with the names 
next to the terminals on the rear panel (such as 

DVD

) which, in turn, correspond with the 

names on the remote control.

6

Select the input(s) to which you’ve 

connected your component.

For example, if your DVD player only has an 
optical output, you will need to change the 

DVD

 input function’s 

Digital In

 setting from 

COAX-1

(default) to the optical input you’ve 

connected it to.The numbering (

OPT-1

 to 

2

) 

corresponds with the numbers beside the 
inputs on the back of the receiver.

Note

1 • Depending on the characteristics of your room, sometimes identical speakers with cone sizes of around 12 cm will 

end up with different size settings. You can correct the setting manually using the 

Manual speaker setup

 on page 100.

• The subwoofer distance setting may be farther than the actual distance from the listening position. This setting 

should be accurate (taking delay and room characteristics into account) and generally does not need to be changed.

• If Auto MCACC Setup measurement results are incorrect due to the interaction of the speakers and viewing 

environment, we recommend adjusting the settings manually.

RECEIVER

A/V RECEIVER

E x i t

R e t u r n

a .  Manual  SP  Setup

b .   I n p u t   S e t u p

c .  OSD  Language

4.System Setup

d .  Network  Setup
e .  Other  Setup

4b.Input Setup

A/V RECEIVER

E x i t

F i n i s h

Input : 

DVD

Input Name 

: 

Rename

Digital In 

: 

COAX-1

HDMI Input 

: 

- - -

Input Skip 

: 

OFF

Component In 

: 

Comp-1

VSX-1020_SYXCN.book  42 ページ  

年

月

日　金曜日　午前９時

分