Pioneer VSX-920 / VSX-1020 / VSX-1025 - Инструкция по эксплуатации - Страница 80

Controlling the rest of your system

09

80

En

Resetting the input assignment

of one of the input function 
buttons

This procedure resets the input assignment 

preset at the remote control’s input function 

button, restoring the default.

1

Press and hold R.SETUP, then press “9” 

for three seconds.

The LED flashes continuously.

• To cancel the preset setup mode press 

R.SETUP

.

2

Press and hold the input function button 

corresponding to the command to be erased 
for three seconds.

If the LED lights for one second, the erasing 

has been successfully completed.

Direct function

• Default  setting: 

On

You can use the direct function feature to 

control one component using the remote 
control while at the same time using your 
receiver to play a different component. This 

could let you, for example, use the remote 
control to set up and listen to a CD on the 
receiver, and then use the remote control to 

rewind a tape in your VCR while you continue 

to listen to your CD player.
When direct function is on, any component you 
select (using the input function buttons) will be 

selected by both the receiver and the remote 
control. When you turn direct function off, you 
can operate the remote control without 

affecting the receiver.

1

Press and hold R.SETUP, then press “5” 

for three seconds.

The LED flashes continuously.

• To cancel the preset setup mode press 

R.SETUP

.

2

Press the input function button for the 

component you want to control.

3

Press “1” (On) or “0” (Off) to switch the 

direct function mode.

If the LED lights for one second, the setting has 

been successfully completed.
If the LED flashes three times, the setting has 
failed.

4

Press R.SETUP to exit the setup.

VSX-1020_SYXCN.book  80 ページ  

年

月

日　金曜日　午前９時

分