NETGEAR S3300-28X (GS728TX) 24x1GE - Инструкция по эксплуатации - Страница 9

Коммутаторы NETGEAR S3300-28X (GS728TX) 24x1GE - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 373
Загружаем инструкцию
background image

9

1

1.   

Getting Started

This manual describes how to configure and operate the ProSAFE

®

 S3300 Smart Switch family 

by using the web-based graphical user interface (GUI). The manual describes the software 
configuration procedures and explains the options available within those procedures. The S3300 
switches are referred to as the NETGEAR switch throughout this document. The individual 
switches are:

S3300-28X

S3300-28X-PoE+

S3300-52X

S3300-52X-PoE+

In Release 6.6.4, two M4300 product series are added to enhance the stacking capability of 
S3300. 

The M4300-12X12F (XSM4324S) is a stackable, fully-managed L2+ Gigabit switch. This 
24-port Gigabit Ethernet Layer 2 switch provides 12 * 10G Copper ports and 12 * 10G 
Fiber ports. 

The M4300-24X (XSM4324CS) is a stackable, fully-managed L2+ Gigabit switch. It has 
24 port 10GBASE-T with 4 shared SFP+. 

These are the existing M4300 series switches that have been re-configured to act as S3300 
switches. The capabilities of the switches will match the S3300 capabilities. 

S3300 models can stack, up to six switches high. On S3300 models, any of the four 10G ports 
can be configured as stacking ports. Two M4300 24-port 10G switches offer mixed stacking, 
respecting the same rules for consistency:

Six-switches total height

On M4300 10G models, a maximum of four 10G ports (any four from below the eight 
available ports) can be configured as stacking ports concurrently.

-

M4300-12X12F: port 9–12 and port 21–24

-

M4300-24X: port 17–24

In order to stack M4300 models with the S3300 models, you will need to procure standard 
version M4300 switches, and apply a special firmware image to downgrade them to S3300 
software for compatibility and mixed stacking. If you later want to go back to M4300 software on 
the M4300 models running S3300 firmware, you can upgrade the M4300 models using the 

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к NETGEAR S3300-28X (GS728TX) 24x1GE?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"