NETGEAR S3300-28X (GS728TX) 24x1GE - Инструкция по эксплуатации - Страница 221

Коммутаторы NETGEAR S3300-28X (GS728TX) 24x1GE - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 373
Загружаем инструкцию
background image

Configuring Routing 

221

 S3300 Smart Managed Pro Switch

Create a Static ARP Entry

Use this screen to add a static entry to the ARP table. 

To add an entry to the ARP table:

1. 

Select 

Routing 

>

 ARP 

>

 Advanced 

>

 ARP Create

.

2. 

In the IP Address field, specify the IP address to add. 

It must be the IP address of a device on a subnet attached to one of the switch’s existing 
routing interfaces.

3. 

In the MAC Address field, specify the unicast MAC address of the device. 

The format is six 2-digit hexadecimal numbers separated by colons, for example 
00:06:29:32:81:40.

4. 

Click the 

Add

 button.

For information about the information in the Routing VLANs ARP Cache table, see 

Table 83, 

ARP cache information for routing VLANs 

on page 220.

Configure Global ARP Settings

Use the Global ARP Configuration screen to display and change the configuration 
parameters of the ARP table.

To display or change the parameters of the ARP table:

1. 

Select 

Routing 

>

 ARP > Advanced 

>

 Global ARP Configuration

.

2. 

In the Age Time field, specify the number of seconds it will take for an ARP entry to age out. 

3. 

In the Response Time field, specify the number of seconds the switch will wait for a 
response to an ARP request.

4. 

In the Retries field, specify the maximum number of times an ARP request will be retried. 

5. 

In the Cache Size field, specify the maximum number of entries for the ARP cache. 

6. 

Next to Dynamic Renew, select 

Enable

 to allow the ARP component to automatically 

attempt to renew dynamic ARP entries c when they age out.

7. 

Click the 

Apply

 button.

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к NETGEAR S3300-28X (GS728TX) 24x1GE?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"