NETGEAR S3300-28X (GS728TX) 24x1GE - Инструкция по эксплуатации - Страница 81

Configure System Information 

81

 S3300 Smart Managed Pro Switch

Stack Sample Mode



To configure the stack sampling parameters:

1. 

Select the 

Stack Sample Mode

. The global status management mode which can be:

•

Cumulative. 

This tracks the sum of received time stamp offsets cumulatively.

•

History

. This tracks the history of received timestamps.

The factory default is 

Cumulative

.

2. 

Enter a value for 

Max Samples 

– the maximum number of samples to keep. The valid 

range is 100 to 500. 

Max Samples

 applies to 

History

 mode.

Figure 46. Configure Stack Sample Mode

3. 

Click the 

Apply

 button to send the updated configuration to the switch. The status 

management mode and sample size parameters are applied globally to all units in the stack. 
Configuration changes take effect immediately. 

4. 

Click the 

Cancel

 button to cancel the configuration on the screen and reset the data on the 

screen to the latest value of the switch.

Stack Configuration



To configure the stack:

1. 

Select the 

Unit ID

 from the displayed list of units in the stack.

2. 

Use the 

Change Switch ID to

 field to renumber the switch ID of the selected switch.

3. 

Specify the 

Switch Type

 - the type of switch hardware when creating a new switch in the 

stack. 

4. 

Specify the 

Switch Priority

 - the priority of a switch to become the primary management 

unit. The range for priority is 0 to 15. The factory default is unassigned. The switch with the