NETGEAR S3300-28X (GS728TX) 24x1GE - Инструкция по эксплуатации - Страница 287

Коммутаторы NETGEAR S3300-28X (GS728TX) 24x1GE - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 373
Загружаем инструкцию
background image

Managing Device Security 

287

 S3300 Smart Managed Pro Switch

IPv6 Rules

Use the IPv6 Rules screen to configure the rules for the IPv6 Access Control Lists. The IPv6 
Access Control Lists are created using the IPv6 Access Control List Configuration screen. By 
default, no specific value is in effect for any of the IPv6 ACL rules.

To add a rule to an IPv6 ACL:

1. 

Select 

Security 

>

 ACL

 > 

Advanced 

>

 IPv6 Rules

.

2. 

In the ACL Name list, select the name of the ACL to add a rule to.

3. 

Click the 

Add

 button. 

The screen displays the IPv6 ACL Rule Configuration fields.

Figure 103.  IPv6 ACL Rule Configuration

4. 

Next to Sequence Number, specify a number in the range of 1 to 2147483647 to identify 
the IPv6 ACL rule. 

You can create up to 50 rules for each ACL.

5. 

Select or specify values for one or more of the following match criteria:

Rule ID

. Enter a whole number in the range of 1 to 2147483647 that will be used to 

identify the rule. An IPv6 ACL can have up to 50 rules.

Action

. Specify what action should be taken if a packet matches the rule’s criteria. 

The choices are Permit or Deny.

Logging

. When set to Enable, logging is enabled for this ACL rule (subject to 

resource availability in the device). If the Access List Trap Flag is also enabled, then 
this causes periodic traps to be generated indicating the number of times this rule was 
hit during the current report interval. A fixed 5-minute report interval is used for the 
entire system. A trap is not issued if the ACL rule hit count is zero for the current 
interval. This field is visible for a Deny action.

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к NETGEAR S3300-28X (GS728TX) 24x1GE?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"