Коммутаторы NETGEAR S3300-28X (GS728TX) 24x1GE - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Monitoring the System
320
S3300 Smart Managed Pro Switch
STP State
The port's current state Spanning Tree state. This state controls what action a port
takes on receipt of a frame. If the bridge detects a malfunctioning port it will place
that port into the broken state. The other five states are defined in IEEE 802.1D:
•
Disabled
•
Blocking
•
Listening
•
Learning
•
Forwarding
•
Broken
Admin Mode
The port control administration state:
•
Enable.
The port can participate in the network (default).
•
Disable.
The port is administratively down and does not participate in the
network.
Flow Control Mode
Indicates whether flow control is enabled or disabled for the port. This field is not
valid for LAG interfaces.
LACP Mode
The Link Aggregation Control Protocol administration state, which is one of the
following:
•
Enable.
The port is allowed to participate in a port channel (LAG), which is the
default mode.
•
Disable.
The port cannot participate in a port channel (LAG).
Physical Mode
Indicates the port speed and duplex mode. In auto-negotiation mode, the duplex
mode and speed are set from the auto-negotiation process.
Physical Status
Indicates the port speed and duplex mode status.
Link Status
Indicates whether the link is up or down.
Link Trap
Indicates whether or not the switch sends a trap when link status changes.
•
Enable.
The system sends a trap when the link status changes.
•
Disable.
The system does not send a trap when the link status changes.
Packets RX and TX 64
Octets
The total number of packets (including bad packets) received or transmitted that
were 64 octets in length (excluding framing bits but including FCS octets).
Packets RX and TX 65-127
Octets
The total number of packets (including bad packets) received or transmitted that
were between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets).
Packets RX and TX
128-255 Octets
The total number of packets (including bad packets) received or transmitted that
were between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets).
Packets RX and TX
256-511 Octets
The total number of packets (including bad packets) received or transmitted that
were between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets).
Table 102. Detailed Interface Statistics (continued)
Field
Description
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
