Коммутаторы NETGEAR S3300-28X (GS728TX) 24x1GE - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Configuring Quality of Service
237
S3300 Smart Managed Pro Switch
One of the classes must be selected from this list.
4.
If you select the Simple Policy attribute, configure the following fields:
•
Color Mode
. Color Aware mode requires the existence of one or more color classes
that are valid for use with this policy instance; otherwise, the color mode is color blind,
which is the default.
•
Color Conform Mode
. The match-criteria of the color Conform class.
•
Committed Rate
. The committed rate is specified in kilobits-per-second (Kbps) and is
an integer from 1–4294967295.
•
Committed Burst Size
. The committed burst size is specified in kilobytes (KB) and is
an integer from 1–128.
•
Conform Action
. Determines what happens to packets that are considered
conforming (below the police rate). Select one of the following actions:
-
Send
. (default) These packets are presented unmodified by DiffServ to the
system forwarding element.
-
Drop
. These packets are immediately dropped.
-
Mark CoS
. These packets are marked by DiffServ with the specified CoS value
before being presented to the system forwarding element. This selection requires
that the Mark CoS value field be set.
-
Mark IP Precedence
. These packets are marked by DiffServ with the specified IP
Precedence value before being presented to the system forwarding element. This
selection requires that the Mark IP Precedence value field be set.
-
Mark IP DSCP
. These packets are marked by DiffServ with the specified DSCP
value before being presented to the system forwarding element. This selection
requires that the DSCP value field be set. If you select
Other
, enter a custom
value in the DSCP Value field that displays.
•
Violate Action
. Determines what happens to packets that are considered
non-conforming (above the police rate). Select one of the following actions:
-
Send
. (default) These packets are presented unmodified by DiffServ to the
system forwarding element.
-
Drop
. (default) These packets are immediately dropped.
-
Mark CoS
. These packets are marked by DiffServ with the specified CoS value
before being presented to the system forwarding element. This selection requires
that the Mark CoS value field be set.
-
Mark IP Precedence
. These packets are marked by DiffServ with the specified IP
Precedence value before being presented to the system forwarding element. This
selection requires that the Mark IP Precedence value field be set.
-
Mark IP DSCP
. These packets are marked by DiffServ with the specified DSCP
value before being presented to the system forwarding element. This selection
requires that the DSCP value field be set.
5.
Click the
Apply
button.
6.
Click the
Cancel
button to cancel the configuration on the screen, and reset the data on the
screen to the latest value of the switch.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
