NETGEAR S3300-28X (GS728TX) 24x1GE - Инструкция по эксплуатации - Страница 227

Configuring Quality of Service 

227

 S3300 Smart Managed Pro Switch

Interface Queue Configuration

Use the Interface Queue Configuration screen to define what a particular queue does by 
configuring switch egress queues. User-configurable parameters control the amount of 
bandwidth used by the queue, the queue depth during times of congestion, and the 
scheduling of packet transmission from the set of all queues on a port. Each port has its own 
CoS queue-related configuration.

The configuration process is simplified by allowing each CoS queue parameter to be 
configured globally or per-port. A global configuration change is automatically applied to all 
ports in the system.



To configure CoS queue settings for an interface:

1. 

Select 

QoS 

>

 CoS

 > 

Advanced 

>

 Interface Queue Configuration

.

2. 

Select the interfaces to configure. 

For information about how to select and configure one or more ports and LAGs, see 

Configuring Interface Settings 

on page 32.

3. 

Configure any of the following settings:

•

Queue ID

. Select the queue to be configured.

•

Minimum Bandwidth

. Enter a percentage of the maximum negotiated bandwidth for 

the selected queue on the interface. Specify a percentage from 0–100, in increments 
of 1. 

•

Scheduler Type

. Select the type of queue processing. Defining on a per-queue basis 

allows you to create the desired service characteristics for different types of traffic.

-

Weighted

. Weighted round robin associates a weight to each queue. This is the 

default.

-

Strict

. Services traffic with the highest priority on a queue first.

•

Queue Management Type

. The type of packet management used for all packets, 

which is Taildrop. All packets on a queue are safe until congestion occurs. At this 
point, any additional packets queued are dropped.

4. 

Click the 

Apply

 button.