NETGEAR S3300-28X (GS728TX) 24x1GE - Инструкция по эксплуатации - Страница 293

Maintenance 

293

 S3300 Smart Managed Pro Switch

Reset

The Reset menu contains links to the features described in the following sections.

•

Device Reboot 

on page 293

•

Factory Default 

on page 293

Device Reboot

Use the Device Reboot screen to reboot the switch. 



To reboot the switch:

1. 

Select 

Maintenance 

>

 Reset 

>

 Device Reboot

.

2. 

In the 

Reboot Unit No

. field, select the unit to reset. When multiple units are connected in a 

stack, select 

All

 to reset all the units in the stack (in other words, the whole stack) or select 

the unit number to reset only the specific unit.

3. 

Select the check box.

4. 

Click the 

Apply

 button. 

The switch resets immediately. The management interface is not available until the switch 
completes the boot cycle. After the switch resets, the login screen displays.

Factory Default

Use the Factory Default screen to reset the system configuration to the factory default 
values.

Note:

If you reset the switch to the default configuration, the IP address is 
reset to 192.168.0.239, and the DHCP client is enabled. If you loose 
network connectivity after you reset the switch to the factory defaults, 
see 

Connect the Switch to the Network 

on page 13.



To reset the switch to the factory default settings:

1. 

Select 

Maintenance 

>

 Reset 

>

 Factory Default

.

Figure 104.  Factory Default

2. 

Select the check box on the screen.

3. 

Click the 

Apply

 button. 

The switch resets immediately.