NETGEAR S3300-28X (GS728TX) 24x1GE - Инструкция по эксплуатации - Страница 309

Maintenance 

309

 S3300 Smart Managed Pro Switch

Figure 113. Traceroute IPv4

2. 

Use 

IP Address/Hostname

 to enter the IP address or Hostname of the station you want the 

switch to discover a path. The default value is blank. The IP Address or Hostname you enter 
is not retained across a power cycle.

3. 

Enter the number of 

Probes Per Hop

, the number of times each hop should be probed. The 

default value is 3. The range is 1 to 10. The Probes per Hop you enter is not retained across 
a power cycle.

4. 

Enter the 

Maximum TTL

, the maximum time-to-live for a packet in the number of hops for 

the destination. The default value is 30. The range is 1 to 255. The MaxTTL you enter is not 
retained across a power cycle.

5. 

Enter the 

Initial TTL 

the initial time-to-live for a packet in the number of hops. The default 

value is 1. The range is 1 to 255.The InitTTL you enter is not retained across a power cycle.

6. 

Enter the 

Maximum Failures

 allowed in the session. The default value is 5. The range is 1 

to 255. The MaxFail you enter is not retained across a power cycle.

7. 

Interval (secs)

 - Enter the number of seconds between probes. The default value is 3. The 

range is 1 to 60. The Interval you enter is not retained across a power cycle.

8. 

Enter the UDP Destination 

Port

 in the probe packets. The default value is 33434. The range 

is 1- 65535. The port you enter is not retained across a power cycle.

9. 

Enter the 

Size

 of the probe packets. The default value is 0. The range is 0 to 39936. The 

Size you enter is not retained across a power cycle.

10. 

Enter the 

Source

 IP address or interface to use when sending the echo request packets. If 

source is not required, select 

None

 as the source option. Possible values are:

•

None — The source is the IP address of the default outgoing interface.