NETGEAR S3300-28X (GS728TX) 24x1GE - Инструкция по эксплуатации - Страница 218

Configuring Routing 

218

S3300 Smart Managed Pro Switch 

The Route Status table provides information about the static routes configured on the switch 
and the dynamic routes the switch has learned.



To delete one or more static routes:

1. 

Select the check box next to each route to remove.

2. 

Click the 

Delete

 button.

Table 81.  Routing table information 

Field

Description

Route Type

Indicates whether the learned route is a static or default route.

Network Address

The IP route prefix for the destination. 

Subnet Mask

Also referred to as the subnet/network mask, this indicates the portion of the IP 
interface address that identifies the attached network. 

Protocol

This field tells which protocol created the specified route. The possibilities are 
one of the following:

• 

Local 

• 

Static 

Route Type

This field can be Connected or Static or Dynamic based on the protocol.

Next Hop Interface

The outgoing router interface to use when forwarding traffic to the destination. 

Next Hop IP Address

The outgoing router IP address to use when forwarding traffic to the next router 
(if any) in the path towards the destination. The next router is always one of the 
adjacent neighbors or the IP address of the local interface for a directly attached 
network. 

Preference

The preference is an integer value from 1 to 255. You can specify the preference 
value of an individual static route. 

Metric Administrative 

cost 

of the path to the destination.