NETGEAR S3300-28X (GS728TX) 24x1GE - Инструкция по эксплуатации - Страница 54

Configure System Information 

54

S3300 Smart Managed Pro Switch 

3. 

In the Date field, enter the date in the DD/MM/YYYY format.

4. 

In the Time field, enter the time in HH:MM:SS format.

Note:

If you do not enter a date and time, the switch will calculate the date 
and time using the CPU’s clock cycle.

5. 

Click the 

Apply

 button. 



To configure the time by using SNTP:

1. 

Select 

System 

>

 Management 

>

 Time 

>

 Time Configuration

.

2. 

Next to Clock Source, select the 

SNTP

 radio button.

The screen refreshes and displays the SNTP Global Configuration screen.

Figure 32. Time > SNTP Global Configuration

3. 

Next to Client Mode, select the mode of operation of the SNTP client:

•

Disable. SNTP is not operational. No SNTP requests are sent from the client nor will 
any received SNTP messages be processed.

•

Unicast

. SNTP operates in a point-to-point fashion. A unicast client sends a request 

to a designated server at its unicast address and expects a reply from which it can 
determine the time and, optionally the round-trip delay and local clock offset relative 
to the server.

•

Broadcast

. SNTP operates in the same manner as multicast mode but uses a local 

broadcast address, instead of a multicast address. The broadcast address has a 
single subnet scope while a multicast address has Internet wide scope.

The default value is 

Disable.