Коммутаторы NETGEAR S3300-28X (GS728TX) 24x1GE - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Configure System Information
125
S3300 Smart Managed Pro Switch
a.
Specify the
Remote IP Address
of the TFTP server on which the snooping database
is stored when
Remote
is selected.
b.
Specify the
Remote File Name
of the DHCPv6 snooping bindings database in which
the bindings are stored when
Remote
is selected. The Remote File Name can be 1
to 32 alphanumeric characters.
3.
In the
Write Delay
field, specify the maximum amount of time to wait between writing
bindings information to persistent storage. The Write Delay range is 15 to 86400 seconds.
The default is 300 seconds.
The delay allows the device to collect as many entries as possible (new and removed)
before writing them to the persistent file.
4.
Click the
Apply
button to send the updated configuration to the switch. Configuration
changes take effect immediately.
5.
Click
Cancel
to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
DHCPv6 Snooping Statistics
Use this screen to view and clear per-interface statistics about the DHCPv6 messages
filtered by the DHCPv6 snooping feature on untrusted interfaces.
To view and clear the DHCPv6 snooping statistics:
1.
Select
System
>
Services
>
DHCPv6 Snooping
>
Statistics
.
2.
Click
Clear
to clear all interfaces statistics.
3.
Click
Refresh
to refresh the data on the page with the latest information on the switch.
The following table describes the DHCP snooping statistics.
Table 44. DHCPv6 snooping statistics
Field
Description
Interface
The untrusted and snooping-enabled interface on which statistics are displayed.
MAC Verify Failures
The number of packets that were dropped by DHCPv6 snooping because the
source MAC address and client hardware address did not match. MAC address
verification is performed only if it is globally enabled.
Client Ifc Mismatch
The number of DHCPv6 messages that were dropped by DHCPv6 snooping
based on the source MAC address and client hardware address verification.
DHCPv6 Server
Msgs Received
The number of DHCPv6 server messages ((DHCPOFFER, DHCPACK,
DHCPNAK, DHCPRELEASEQUERY) that have been dropped on an untrusted
port.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
