Мойки высокого давления Karcher CB 2 23 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
-
19
200
Control voltage is missing
Emergency stop pressed, protective
switch triggered, reset button has not
been pressed
Press all emergency stops, check that all
protective motor switches have been
switched on, press reset button in the con-
trol station
201
Plant not in operation (operational time
switched off)
Night switch off of the unit is active,
key switch of the feed distributor is po-
sitioned at "0"
Check key switch of the feed distributor
(position it to 1 or 2)
203
Portal not in normal setting
Unit not in normal setting
Drive unit to normal setting
204
Side-brushes not facing outwards
205
Side-brush 1 not facing outwards
206
Side-brush 2 not facing outwards
208
Roof brush not facing upward
209
Drier not facing upward
210
Wheel washing not facing outward
Unit not in normal setting or compressed
air supply has been switched off
Check compressed air supply; drive unit
into normal setting
211
Wheel washing 1 is not facing outward
(traffic light forward + backward are blink-
ing once)
212
Wheel washing 2 is not facing outward
(traffic light forward + backward are blink-
ing twice)
250
Unit has not been initialised
Measurement drive has not yet been
done
Washing is not possible; call Customer
Service
251
Emergency operations of processed wa-
ter are active
Processed water unit has a fault
Repair processed water plant; unit an be
used with fresh water in emergency oper-
ations mode
* green indicator lamp at the switching cabinet goes off.
Display Fault
Possible cause
Remedy
41
EN
