Мойки высокого давления Karcher CB 2 23 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
-
16
50
Limit switch FA (drive start) has not been
exited despite driving command
Limit switch activated through foreign
metal or is defective
Check limit switch portal driving for de-
fects; remove metal parts from the hall
floor; switch off/on the unit, repeat washing
process
51
Limit switch FA (Drive start) has not
reached expected position
52
Limit switch FE (drive end) has not been
exited despite driving command
53
Limit switch FE (Drive end) has not
reached expected position
54
Travel command has been given but
SB1A (side brush 1, outward) limit switch
has not been exited
Limit switch activated through foreign
metal or is defective, drive wheel is
turning
Check limit switch of side brushes for de-
fects; clean upper running surface of the
side-brush holder; switch off/on the unit,
repeat washing process
55
Limit switch SB1A (side brush 1, outward)
has not reached expected position
Limit switch defective, drive wheel is turn-
ing
56
Travel command has been given but
SB1E (side brush 1, driven-in) limit switch
has not been exited
57
Limit switch SB1E (side brush 1, driven-
in) has not reached expected position
58
Travel command has been given but
SB2A (side brush 2, outward) limit switch
has not been exited
59
Limit switch SB2A (side brush 2, outward)
has not reached expected position
60
Travel command has been given but
SB2E (side brush 2, driven-in) limit switch
has not been exited
61
Limit switch SB2E (side brush 2, driven-
in) has not reached expected position
62
Travel command has been given but DBO
(top roof brush) limit switch has not been
exited
Limit switch is defective
Check limit switch for damages, switch on/
off the unit, repeat washing process
63
Limit switch DBO (top roof brush) has not
reached expected position
66
Travel command has been given but DBU
limit switch (lower roof brush) has not
been exited
67
Limit switch DBU (lower roof brush) has
not reached expected position
68
Travel command has been given but TRO
(upper roof drier) limit switch has not been
exited
69
Limit switch TRO (upper roof drier) has
not reached expected position
70
Travel command has been given but TRU
(lower roof drier) limit switch has not been
exited
71
Limit switch TRU (lower roof drier) has not
reached expected position
80
Roof brush alignment too high
Cable, motor or gears of rotary roof
brushes defective
Switch off and switch on the unit, repeat
washing process, call Customer Service
81
Roof brush alignment too low
83
Roof brush performance during the wash
too low
84
Side-brush 1 alignment too high
Cable, motor or gears of rotary side
brush 1 defective
85
Side-brush 1 alignment too low
87
Side-brush 1 performance during the
wash too low
88
Side-brush 2 alignment too high
Cable, motor or gears of rotary side
brush 2 defective
89
Side-brush 2 alignment too low
91
Side-brush 2 performance during the
wash too low
100
Wheel wash 1 does not drive back to base
setting
No compressed air, wheel wash has
got jammed in the rim
Check compressed air supply and com-
pressor; switch off the unit and remove the
wheel wash from the rim; repeat washing
process
101
Wheel wash 2 does not drive back to base
setting
Display Fault
Possible cause
Remedy
38
EN
