Hitachi CS33EDT - Инструкция по эксплуатации - Страница 10

English

9

Maintenance

safety

○

  Maintain the unit/machine according to recommended procedures.

○

  Disconnect the spark plug before per forming maintenance 

except for carburetor adjustments.

○

  Keep others away when making carburetor adjustments.

○

  Use only genuine HITACHI replacement par ts as recommended 

by the manufacturer.

CAUTION

Do not disassemble the recoil star ter. You may get a possibility 
of personal injur y with recoil spring.

WARNING

Improper maintenance could result in serious engine damage or 
in serious personal injur y.

Transport

and

storage

○

  Carr y the unit /machine by hand with the engine stopped and the 

mu

ffl

  er away from your body.

○

  Allow the engine to cool, empty the fuel tank, and secure the 

unit /machine before storing or transpor ting in a vehicle.

○

  Empty the fuel tank before storing the unit /machine. It is 

recommended that the fuel be emptied after each use. If fuel is 
left in the tank, store so fuel will not leak.

○

  Store unit /machine out of the reach of children.

○

  Clean and maintain the unit carefully and store it in a dr y place.

○

  Make sure ignition switch is o

ff

   when transpor ting or storing.

○

  When transpor ting or storage, cover chain with guide bar cover.

If situations occur which are not covered in this manual, take care and 
use common sense. Contact HITACHI dealer if you need assistance. 
Pay special attention to statements preceded by the following words:

WARNING

Indicates a strong possibility of severe personal injur y or loss of 
life, if instructions are not followed.

CAUTION

Indicates a possibility of personal injur y or equipment damage, if 
instructions are not followed.

NOTE

Helpful information for correct function and use.

WARNING

KICKBACK

DANGER

(Fig.

1)

One of the most severe dangers when working with a chain saw is 
the possibility of kickback. Kickback may occur when the upper tip 
of the guide bar touches an object, or when the wood closes in and 
pinches the saw chain in the cut. Tip contact in some cases may 
cause a lightning fast reverse reaction, kicking the guide bar up and 
back toward you. Pinching the saw chain along the top of the guide 
bar may also push the guide bar rapidly back towards you. Either of 
these reactions may cause you to lose control of the saw which could 
result in serious personal injur y. Even though your saw has safety 
built into its design, you should not rely on these safety features 
exclusively. Know where your bar tip is at all times. Kickback does 
occur if you allow the kickback zone (1) of the bar to touch an object. 
Do not use that area. Kickback from pinching is caused by a cut 
closing and pinching the upper side of the guide bar. Study your cut 
and make sure it will open as you cut through. Maintain control when 
the engine is running by always keeping a 

fi

 rm grip on the saw with 

your right hand on the rear handle, your left hand on the front handle 
and your thumbs and 

fi

 ngers encircling the handles. Always hold the 

saw with both hands during operation and cut at high engine speed.

000Book̲CS33EDT̲EE.indb   9

000Book̲CS33EDT̲EE.indb   9

2011/08/06   8:57:18

2011/08/06   8:57:18