Bosch MUM 58K20 - Инструкция по эксплуатации - Страница 19

19

en

For your safety

Do not change tools until the drive has come to a standstill – when 

the appliance is switched off, the drive continues running briefly and 

stops in the tool change position. Do not move the swivel arm until 

the tool has come to a standstill. For reasons of safety the appliance 

cannot be operated unless unused drives are covered with drive 

guards.

Before attaching / removing the continuous-feed shredder, wait until 

the drive has come to a standstill and pull out the mains plug. Do not 

reach into the feed tube.

A

Risk of injury from sharp blades!

Do not grip the sharp blades or edges of the cutting discs. Take hold 

of cutting discs by the edge only. Do not touch blender blades with 

bare hands.

A

Risk of injury from sharp blades / rotating drive! 

Never place fingers in the attached blender! Do not remove / attach 

the blender until the drive is at a standstill! Operate the assembled 

blender only and with the lid attached.

A

Risk of scalding!

If processing hot liquids, steam escapes through the funnel in the lid.

Add a max. 0.5 litres of hot or frothing liquid.

A

Important!

Use the appliance with original accessories only. When using the 

accessories, follow the enclosed operating instructions.

Use only one tool or accessory at any one time.

A

Explanation of the symbols on the appliance or accessory

i

Follow the instructions in the operating instructions.

Y

Caution! Rotating blades.

W

Caution! Rotating tools.

Do not place fingers in the feed tube.