Bosch MUM 58K20 - Инструкция по эксплуатации - Страница 22

22 

en

Operation 

Operation

W

Risk of injury!

Do not insert mains plug until all preparations 

for working with the appliance are complete.

Attention!

Do not operate the appliance without an 

accessory/tool in the operating position. Do 

not operate the appliance empty. Do not 

expose appliance or accessories to heat 

sources. Parts are not microwave-safe.

■ Before operating the appliance and acces-

sories for the first time, clean thoroughly; 

see “Cleaning and servicing”.

Important information

In these instructions for use the recom-

mended reference values for the operating 

speed refer to appliances with a 7-setting 

rotary switch. For appliances with a 4-setting 

rotary switch you can find the values in 

brackets after the values for a 7-setting 

rotary switch. 

These operating instructions contain a 

sticker with reference values for the oper-

ating speed of the appliance when using 

the tools or accessories. We recommend 

attaching this sticker to the appliance 

(Fig. 

C

)

.

Preparation

■ Place the base unit on a smooth, clean 

surface.

■ Pull out the power cord 

(Fig. 

D

)

. 

MUM52../MUM54../MUM58.. 

Cord store: 

Pull out cable to the required 

length. 

MUM55../MUM56.. 

Automatic cord winder: 

Pull out the cord in one go to the 

required length (max. 100 cm) 

and slowly release; the cord is 

locked.  

Reducing the cord length: 

Pull gently on the cord and allow it to roll 

up to the required length. Then gently pull 

the cord again and slowly release; the 

cable is locked.

Warning!

Do not twist the cord when inserting it. If the 

appliance features an automatic cord winder, 

do not insert the cord manually. If the cord 

jams, pull out the cord all the way and then 

allow it to wind up.

■ Insert the mains plug.

Bowl and tools

W

Risk of injury from the rotating tools

While the appliance is operating, never place 

fingers in the mixing bowl. Attach the cover 

(12) before operating the appliance! 

Do not change tools until the drive has 

come to a standstill – when the appliance 

is switched off, the drive continues running 

briefly and stops in the tool change position. 

Do not move the swivel arm until the tool has 

come to a standstill. 

For reasons of safety the appliance may only 

be operated when unused drives have been 

covered with drive guards (5, 8).

Attention!

Use bowl with this appliance only.

Stirrer (13)

for stirring dough, e.g. cake mixture 

Whisk (14)

for whisking egg whites, cream and 

light dough, e.g. sponge mixture

Kneading hook (15)

for kneading heavy dough and 

mixingin ingredients that ought not 

be cut (e.g. raisins and chocolate 

chips)

Working with the bowl and the tools

Fig. 

E

:

■ Press the Release button and 

move the swivel arm to position 

2

.

■ Insert the bowl: 

Tilt the bowl forwards and then set 

it down. Turn anti-clockwise until it locks 

into place.

■ Depending on the processing task, insert 

the stirrer, whisk or kneading hook until it 

locks into position.