Ryobi ONE+ RY18EGA-0 5133004891 - Инструкция по эксплуатации - Страница 4

■

Use the power tool, accessories and tool bits etc. 
in accordance with these instructions, taking into 
account the working conditions and the work to 
be performed.

 Use of the power tool for operations 

different from those intended could result in a hazardous 
situation.

■

Keep handles and grasping surfaces dry, clean 
and free from oil and grease.

 Slippery handles and 

grasping surfaces do not allow for safe handling and 
control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

■

Recharge only with the charger specified by the 
manufacturer.

 A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 
another battery pack.

■

Use power tools only with specifically designated 
battery packs.

 Use of any other battery packs may 

create a risk of injury and fire.

■

When battery pack is not in use, keep it away from 
other metal objects, like paper clips, coins, keys, 
nails, screws or other small metal objects, that can 
make a connection from one terminal to another.

Shorting the battery terminals together may cause burns 
or a fire.

■

Under abusive conditions, liquid may be ejected from 
the battery; avoid contact. If contact accidentally 
occurs, flush with water. If liquid contacts eyes, 
additionally seek medical help.

 Liquid ejected from 

the battery may cause irritation or burns.

■

Do not use a battery pack or tool that is damaged or 
modified.

 Damaged or modified batteries may exhibit 

unpredictable behaviour resulting in fire, explosion or 
risk of injury.

■

Do not expose a battery pack or tool to fire or 
excessive temperature.

 Exposure to fire or temperature 

above 130°C may cause explosion.

■

Follow all charging instructions and do not charge 
the battery pack or tool outside the temperature range 
specified in the instructions.

 Charging improperly or at 

temperatures outside the specified range may damage 
the battery and increase the risk of fire.

SERVICE

■

Have your power tool serviced by a qualified repair 
person using only identical replacement parts. 

This 

will ensure that the safety of the power tool is maintained.

■

Never service damaged battery packs.

 Service 

of battery packs should only be performed by the 
manufacturer or authorized service providers.

CORDLESS EDGER SAFETY WARNINGS

■

When using the product, the safety rules must be 
followed. For your own safety and that of bystanders, 
please read these instructions before operating the 
product. Please keep the instructions safe for later use.

■

The product is not intended to be used by children or 
persons with reduced physical, mental, or sensory 
capabilities. Children should be adequately supervised 
to ensure that they do not play with the product.

■

Never use the edger while people, especially children or 
pets, are nearby.

■

While edging, always wear eye and ear protection, 
substantial footwear, and long trousers.

■

Always be sure of proper footing on slopes.

■

Use extreme caution when reversing or pulling the edger 
toward you.

■

Some regions have regulations that restrict the use of 
the product to some operations. Check with your local 
authority for advice.

■

Thoroughly inspect the surface where the product is to 
be used, and remove all stones, sticks, wires, bones, 
and other foreign things.

■

Avoid using the product in bad weather especially if 
there is a risk of lightning.

■

Use the product in daylight or with good artificial light.

■

Avoid using the product on wet grass.

■

Keep proper footing and balance at all times.

■

Do not walk backwards when using the product.

■

Walk, never run.

■

Ensure that the guide wheel is always on the ground 
during work. Do not lift the product more than absolutely 
neccessary from the ground when starting.

■

Do not cut on surfaces other than grass on the ground. 
Make sure that the blade has stopped before crossing 
surfaces other than grass and when transporting the 
product to and from the area to be edged.

■

Never use the product with damaged guards or without 
guards in place.

■

Keep hands and feet away from the cutting means at all 
times, especially when turning on the motor.

■

Beware of objects thrown by the cutting blade.

■

To reduce the risk of injury associated with contacting 
moving parts, always turn off the product, remove the 
battery pack, and allow both to cool down. Make sure 
that all moving parts have come to a complete stop:

●

before servicing

●

before clearing a blockage

●

before checking, cleaning, and working on the 
product

●

before changing accessories

●

after striking a foreign object

–

Inspect the blade for damage, and make repairs 
before restarting and operating the product.

●

whenever leaving the product unattended

●

whenever performing maintenance

●

whenever the product starts to vibrate abnormally

–

Check the product immediately.

■

Always ensure that ventilation openings are kept clear 
of debris.

■

Do not operate the product while barefoot or when 
wearing sandals or similar lightweight footwear. Wear 
protective footwear that will protect your feet and 
improve your footing on slippery surfaces.

■

Do not grasp the exposed cutting edges when picking up 
or holding the product.

■

Replace a dull or worn blade. Do not attempt to sharpen 
the blade.

■

Do not use the edger on or near gravel surfaces.

■

Make yourself familiar with the area you are edging. Be 
aware of uneven sidewalks and holes in the terrain as 
well as other similar hazardous conditions.

4

Original Instructions