Ryobi ONE+ RY18EGA-0 5133004891 - Инструкция по эксплуатации - Страница 3

Safety, performance, and dependability have been given top 
priority in the design of your cordless edger.

INTENDED USE

The cordless edger is intended to be used only by adults 
who have read and understood the instructions and 
warnings in this manual and can be considered responsible 
for their actions.
The product is intended only for outdoor use in a well-
ventilated area. For safety reasons, the product must be 
adequately controlled by a two-handed operation. The 
product is designed for home or domestic use.
The product is intended for edging along sidewalks, 
driveway, 

fl

 ower beds, and similar areas.

The product should not be used for cutting or chopping 
hedges, shrubs, bushes, 

fl

 owers and compost.

Do not use the product for any other purpose.

GENERAL POWER TOOL SAFETY WARNINGS

 WARNING! Read all safety warnings, instructions, 

illustrations and specifications provided with this 
power tool.

 Failure to follow all instructions listed below 

may result in electric shock, 

fi

 re and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) 
power tool.

WORK AREA  SAFETY

■

Keep work area clean and well lit.

 Cluttered or dark 

areas invite accidents.

■

Do not operate power tools in explosive 
atmospheres, such as in the presence of flammable 
liquids, gases or dust.

 Power tools create sparks 

which may ignite the dust or fumes.

■

Keep children and bystanders away while operating 
a power tool.

 Distractions can cause you to lose control.

ELECTRICAL SAFETY

■

Power tool plugs must match the outlet. Never 
modify the plug in any way. Do not use any adapter 
plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk 
of electric shock.

■

Avoid body contact with earthed or grounded 
surfaces, such as pipes, radiators, ranges and 
refrigerators.

 There is an increased risk of electric 

shock if your body is earthed or grounded.

■

Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of 
electric shock.

■

Do not abuse the cord. Never use the cord for carrying, 
pulling or unplugging the power tool. Keep cord away 
from heat, oil, sharp edges or moving parts.

 Damaged 

or entangled cords increase the risk of electric shock.

■

When operating a power tool outdoors, use an 
extension cord suitable for outdoor use.

 Use of a cord 

suitable for outdoor use reduces the risk of electric shock.

■

If operating a power tool in a damp location is 
unavoidable, use a residual current device (RCD) 
protected supply. 

Use of an RCD reduces the risk of 

electric shock.

PERSONAL SAFETY

■

Stay alert, watch what you are doing and use 
common sense when operating a power tool. Do not 
use a power tool while you are tired or under the 
influence of drugs, alcohol or medication.

 A moment 

of inattention while operating power tools may result in 
serious personal injury.

■

Use personal protective equipment. Always wear 
eye protection.

 Protective equipment such as dust 

mask, non-skid safety shoes, hard hat or hearing 
protection used for appropriate conditions will reduce 
personal injuries.

■

Prevent unintentional starting. Ensure the switch 
is in the off-position before connecting to power 
source and/or battery pack, picking up or carrying 
the tool.

 Carrying power tools with your finger on the 

switch or energising power tools that have the switch on 
invites accidents.

■

Remove any adjusting key or wrench before turning 
the power tool on.

 A wrench or a key left attached to a 

rotating part of the power tool may result in personal injury.

■

Do not overreach. Keep proper footing and balance 
at all times.

 This enables better control of the power tool 

in unexpected situations.

■

Dress properly. Do not wear loose clothing or 
jewellery. Keep your hair and clothing away from 
moving parts.

 Loose clothes, jewellery or long hair can 

be caught in moving parts.

■

If devices are provided for the connection of dust 
extraction and collection facilities, ensure these are 
connected and properly used.

 Use of dust collection 

can reduce dust-related hazards.

■

Do not let familiarity gained from frequent use of 
tools allow you to become complacent and ignore 
tool safety principles.

 A careless action can cause 

severe injury within a fraction of a second.

POWER TOOL USE AND CARE

■

Do not force the power tool. Use the correct power 
tool for your application.

 The correct power tool will 

do the job better and safer at the rate for which it was 
designed.

■

Do not use the power tool if the switch does not turn 
it on and off.

 Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

■

Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from 
the power tool before making any adjustments, 
changing accessories, or storing power tools.

 Such 

preventive safety measures reduce the risk of starting 
the power tool accidentally.

■

Store idle power tools out of the reach of children 
and do not allow persons unfamiliar with the power 
tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained 
users.

■

Maintain power tools and accessories. Check for 
misalignment or binding of moving parts, breakage 
of parts and any other condition that may affect the 
power tool’s operation. If damaged, have the power 
tool repaired before use.

 Many accidents are caused 

by poorly maintained power tools.

■

Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges are 
less likely to bind and are easier to control.

ENGLISH

EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR

3

Original Instructions