Bosch KEO - Инструкция по эксплуатации - Страница 14

F 016 L70 773 | (22.6.11)

Bosch Power Tools

14

 | English 

Troubleshooting

Maintenance and Service

Maintenance, Cleaning and Storage

f

Before any work on the machine (e. g. mainte-

nance, changing the tool, etc.) as well as during its 

transport and storage, lock the On/Off switch in 

the off position. 

There is danger of injury when the 

On/Off switch is unintentionally actuated.

f

Always remove the blade before any work on the 

machine.

f

For safe and proper working, always keep the ma-

chine and ventilation slots clean.

Clean the saw blade holder preferably with com-

pressed air or a soft brush. Remove the saw blade 

from the power tool for this. Ensure proper operation 

of the saw blade holder by applying a suitable lubri-

cant.
Heavy contamination of the machine can lead to mal-

functions. Therefore, do not saw materials that pro-

duce a lot of dust from below or overhead.
Store the power tool in a secure, dry place, out of the 

reach of children.
Do not place other objects on the power tool.

After-sales Service and Customer Assist-
ance

www.bosch-garden.com

In all correspondence and spare parts order, please al-

ways include the 10-digit article number given on the 

type plate of the machine.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham

Uxbridge

UB 9 5HJ

Tel. Service: +44 (0844) 736 0109

Fax: +44 (0844) 736 0146

E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd.

Unit 23 Magna Drive

Magna Business Park

City West

Dublin 24

Tel. Service: +353 (01) 4 66 67 00

Fax: +353 (01) 4 66 68 88

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.

Power Tools

Locked Bag 66

Clayton South VIC 3169

Customer Contact Center

Inside Australia:

Phone: +61 (01300) 307 044

Fax: +61 (01300) 307 045

Inside New Zealand:

Phone: +64 (0800) 543 353

Fax: +64 (0800) 428 570

Outside AU and NZ:

Phone: +61 (03) 9541 5555

www.bosch.com.au

Republic of South Africa
Customer service

Hotline: +27 (011) 6 51 96 00

Gauteng – BSC Service Centre

35 Roper Street, New Centre

Johannesburg

Tel.: +27 (011) 4 93 93 75

Fax: +27 (011) 4 93 01 26

E-Mail: bsctools@icon.co.za

KZN – BSC Service Centre

Unit E, Almar Centre

143 Crompton Street

Pinetown

Tel.: +27 (031) 7 01 21 20

Fax: +27 (031) 7 01 24 46

E-Mail: bsc.dur@za.bosch.com

Western Cape – BSC Service Centre

Democracy Way, Prosperity Park

Milnerton

Tel.: +27 (021) 5 51 25 77

Fax: +27 (021) 5 51 32 23

E-Mail: bsc@zsd.co.za

Bosch Headquarters

Midrand, Gauteng

Tel.: +27 (011) 6 51 96 00

Fax: +27 (011) 6 51 98 80

E-Mail: rbsa-hq.pts@za.bosch.com

Problem

Possible Cause

Corrective Action

Power tool fails to 

operate

Battery discharged

Recharge battery; also see “Battery Charg-

ing”

Power tool defective

Contact Service Agent

Internal wiring of power tool damaged

Contact Service Agent

Power tool func-

tions intermittently

On/Off switch defective

Contact Service Agent

Excessive vibra-

tions/noise

Power tool defective

Contact Service Agent

Sawing time per 

battery charge too 

low

Blade holder area needs cleaning

Hold the tool to point to the ground and start 

to operate

Saw blade has worn

Change saw blade

Poor sawing technique

see “Working Advice” (figure 8)

Battery not fully charged

Recharge battery; also see “Battery Charg-

ing”

The saw blade is 

running slow

Battery is getting discharged

Recharge battery; also see “Battery Charg-

ing”

On/Off switch is not fully pressed

Fully press On/Off switch

Overloaded during operation

Reduce pressing force of tool against branch

Green and red LED 

flash alternately

Battery temperature is out of charging range Increase or reduce the battery temperature 

to within the specified range between 0 ° C 

and 45 ° C

Red LED flashes 1x Battery voltage is too low, battery is empty Recharge battery; also see “Battery Charg-

ing”

Red LED flashes 2x Battery temperature is out of operating 

range

Increase or reduce the battery temperature 

to within the specified range between 

–15 ° C and +65 ° C

Red LED flashes 

fast 5x

Overload (jammed blade)

Reduce pressing force of tool against branch
Operate tool before the blade touches the 

branch

OBJ_BUCH-1453-001.book  Page 14  Wednesday, June 22, 2011  3:31 PM