Flymo Contour 500 XT 9669524-62 - Инструкция по эксплуатации - Страница 31

30

www.snapper.com

TROUBLESHOOTING

PROBLEM

LOOK FOR

REMEDY

Brake will not hold.

Internal brake worn.

See authorized dealer.

Tractor steers hard or

handles poorly.

Steering linkage is loose.

See authorized dealer.

Improper tire inflation.

See 

Check Tire Pressure section.

Front wheel spindle bearings
dry.

See authorized dealer.

Troubleshooting the Tractor (Continued)

PROBLEM

LOOK FOR

REMEDY

Mower will not raise.

Lift linkage not properly
attached or damaged.

See authorized dealer.

Mower cut is uneven.

Mower not leveled properly.

See authorized dealer.

Tractor tires not properly
inflated.  

See

Check Tire Pressure section.

Mower cut is rough

looking.

Engine speed too slow.

Set to full throttle.

Ground speed too fast.

Slow down.

Mower has other problem.

See authorized dealer.

Engine stalls easily with

mower engaged.

Engine speed too slow.

Set to full throttle.

Ground speed to fast.

Slow down.

Dirty or clogged air filter.

See 

Servicing Air Filter section.

Cutting height set too low.

Cut tall grass at maximum cutting height during first pass.

Engine not up to operating
temperature.

Run engine for several minutes to warm-up.

Starting mower in tall grass.

Start the mower in a cleared area.

Excessive mower vibration.

Mower has other problem.

See authorized dealer.

Engine runs and tractor

drives, but mower will not

drive.

PTO not engaged.

Engage the PTO.

Mower has other problem.

See authorized dealer.

Troubleshooting the Mower

Not for  

Reproduction