Yamaha RX-797 - Инструкция по эксплуатации - Страница 6

CONTROLS AND FUNCTIONS

4

8

EDIT

Exchanges the assignment of two preset stations with each 
other when TUNER is selected as the input source (see 
page 28).

9

FM/AM

Switches the reception band between AM and FM when 
TUNER is selected as the input source (see page 23).

0

TUNING 

l

 / 

h

Selects the tuning frequency when TUNER is selected as 
the input source (see page 23).

A

TUNING MODE

Switches the tuning mode between automatic (the AUTO 
indicator turns on as a result) and manual (the AUTO 
indicator turns off as a result) when TUNER is selected as 
the input source.

B

MEMORY

Stores a station in the system memory (see page 27).
Sets this unit to the automatic preset tuning mode (see 
page 25).

C

PURE DIRECT and indicator

Allows you to listen to a source in the purest possible 
sound. The indicator above it lights up when this function 
is turned on.
See page 19 for details.

D

CD DIRECT AMP and indicator

Allows you to listen to a CD source in the purest possible 
sound. The indicator above it lights up and the front panel 
display turns off when this function is turned on.
See page 19 for details.

E

VOLUME

Increases or decreases the sound output level.

This does not affect the OUT (REC) level.

F

INPUT selector

Selects the input source you want to listen to or watch.

G

A/B/C/D/E

Selects the preset station group (A to E) when TUNER is 
selected as the input source (see page 26).

H

PHONES jack

Outputs audio for private listening with your headphones.

Press SPEAKERS A/B so that the SP A/B indicators turn off 
before you connect your headphones to the PHONES jack.

I

REC OUT selector

Selects a source for recording to the MD recorder or the 
tape deck independently of the INPUT selector setting, 
allowing you to record the selected source while listening 
to another source (see page 20).

J

BASS

Increases or decreases the low frequency response. The 0 
position produces a flat response (see page 19).

K

TREBLE

Increases or decreases the high frequency response. The 0 
position produces a flat response (see page 19).

L

BALANCE

Adjusts the sound output balance of the left and right 
speakers to compensate for sound imbalances caused by 
speaker locations or listening room conditions (see page 
19).

M

LOUDNESS

Retains a full tonal range at any volume level to 
compensate for the human ears’ loss of sensitivity to high 
and low-frequency ranges at a low volume level (see page 
19).

N

Preset station number buttons 
(1 to 8)

Selects the preset station number (1 to 8) directly when 
TUNER is selected as the input source (see page 28).

Note

Note