Smeg KC19RAE - Инструкция по эксплуатации - Страница 18

EN

6

2-DIGIT 10-KEY CAPACITIVE PUSHBUTTON BOARD:

Key 

Function 

Display

A

Turns the suction motor on / off.

Displays the set speed

B

Decreases the operation speed. 

Displays the set speed

C

Increases the operation speed.

Displays the set speed

D

Activates the Intensive speed from any speed even with the 

motor off, this speed is timed. At the end, the system returns to 

the speed previously set. Suitable for dealing with the maximum 

emissions of cooking fumes. 

Displays alternatively HI

Hold the button down for about 5 seconds, when all loads are off 

(Motor + Light), to switch the keyboard lock On / Off.

"- -" Keyboard lock On.

E

24 H function

Activates the motor at the first speed and allows extraction for 

10 minutes every hour.

It displays 24 and the point at the 

bottom right flashes once a second, 

while the motor is in operation. Press 

the key to disable it.

Holding the button down for about 5 seconds when all loads are 

off (Motor + Light), holding key "B" down during the animation, 

the Active Carbon Filters Alarm switches On / Off.

Displays a rotary animation for 

5 seconds. "EF" flashes twice in 

activation.  "EF" flashes once in 

deactivation.

F

Delay function

Enables the automatic shutdown delay of 30'. Suitable for 

removing residual odours.  Can be activated from any position. 

You disable it by pressing the key or turning the motor off.

Displays the operating speed and the 

point on the lower right flashes.

G

With the filter alarm in progress, pressing the key for about 3 

seconds resets the alarm.

After the procedure, the signal 

previously displayed turns off: 

FF  signals the need to wash the 

metallic grease filters. The alarm 

comes on after 100 hours of actual 

operation of the Hood. 

EF  signals the need to replace the 

active carbon filters and the metallic 

grease filters must also be washed. 

The alarm comes on after 200 hours of 

actual operation of the Hood. 

H

Decreases the light intensity at each press of the Key in a cyclic 

manner. 

1

Turns the lighting system on and off at maximum intensity. 

L

Increases the light intensity at each press of the Key in a cyclic 

manner. 

Keyboard lock command: you can lock the keyboard, for example, to clean the glass 

surface, when the Hood has the motor and lights switched off. By pressing key D 

for about 5 seconds, you can enable or disable the keyboard lock which is always 

confirmed with:

“- -” Keyboard lock On.