Ryobi RMS18190-0 - Инструкция по эксплуатации - Страница 8

Ŷ

Do not make any adjustments whilst the saw blade is 
in motion.

Ŷ

Always make sure the battery pack has been removed 
from the product before making adjustments, lubricating 
or when doing any maintenance on the product.

Ŷ

Before and after each use, check the product for 
damage or broken parts. Keep the product in top 
working condition by immediately replacing parts with 
spares approved by the manufacturer.

Ŷ

The blade has sharp edges and may also remain hot 

DIWHUFXWWLQJRSHUDWLRQV([HUFLVHH[WUHPHFDXWLRQZKHQ
FOHDQLQJ DQ H[SRVHG EODGH :HDU JORYHV WR SURWHFW

yourself from personal injury.

Ŷ

Clean the saw and its accessories from dust regularly, 
especially moving parts including the blade guard. 
Use a hand brush or vacuum cleaner to remove dust 
effectively. Do not use compressed air.

Ŷ

For greater safety and reliability, all repairs, including 
changing brushes, should be performed by an authorised 
service centre.

WARNING!

 Do not attempt to disassemble the blade 

guard assembly for cleaning or repair. Damaged guards 
should not be used. Return to an authorised service centre 
for repair or replacement.

Mitre and bevel angle calibration

If mitre and bevel angle calibration are needed, see pages 

±DQGIROORZWKHFDOLEUDWLRQLQVWUXFWLRQV

TRANSPORTATION AND  STORAGE

Ŷ

When storing the product, remove the battery pack. 
Store the product in a secure place that is not accessible 
to children.

Ŷ

Clean the product using a brush and vacuum cleaner 
before storage.

Ŷ

If you remove the saw blade or keep spares with the 
unit, ensure they are in the original packaging to prevent 
injury.

To secure the product prior to movement:

Ŷ

The product should be stored at the zero degree mitre 
and bevel angle and locked in position. The handle 
should be locked in the lower (safe) position with the 
guards closed.

To move or transport in a vehicle:

Ŷ

Secure the product prior to movement as described in 
the manual.

Ŷ

Remove the product from the bench top by releasing the 
4 bolts, one at each corner. Secure the bolts for future 
use. When lifting to a height, two persons wearing heavy 
gloves are needed to lift the base of the product.

Ŷ

When transporting in a vehicle, set the product on its 
base and secure against movement.

SYMBOLS ON THE PRODUCT

Safety alert

European Conformity Mark

British Conformity Mark

Ukraine Conformity Mark

EurAsian Conformity Mark

Please read the instructions carefully 
before starting the machine.

Wear ear protection

Always wear eye protection.

Keep hands away from the cutting area 
and sharp blade.

'RQRWH[SRVHWRUDLQRUXVHLQGDPS

locations.

Wear safety gloves

Blade rotation direction (shown on saw 
blade)

Blade rotation direction (shown on 
blade guard)

Blade width of cut (Kerf)

Number of teeth on this saw blade

Cutting capacity

For cutting wood and analogous 
material

Not for cutting metals

Adjust the position of sliding fence 
before performing bevel or compound 
cuts.

Loosening direction of blade bolt

Waste electrical products should not 
be disposed of with household waste. 

3OHDVHUHF\FOHZKHUHIDFLOLWLHVH[LVW

Check with your Local Authority or 
retailer for recycling advice.

8

Original Instructions