Gorenje TGR65SB6 - Инструкция по эксплуатации - Страница 36

FBV MkII Advanced User Guide:  Controlling Line 6 POD Farm 2

4•6

manually within POD Farm 2 Plug-In for any of your FBV MkII controls!) You’ll see more about 

Local & Global assignments and MIDI Learn in the following sections.  

• 

Pedal Volume 

- Adjusts 

both

 the Tone A Level and Tone B Level faders within the POD Farm 2 

Mixer View simultaneously. If your current POD Farm 2 configuration is a single Tone, then only 

the Tone A Level fader is controlled. Note that this is a Global MIDI assignment.

FBV Express MkII

POD Farm 2-Express.fbv preset settings, when loaded in the FBV Control application

The  above  FBV  Express  MkII  MIDI  Controller  settings  perform  the  following  functions  with  POD 

Farm 2:

FBV Express MkII Control

POD Farm 2 Pre-configured Model & Parameter

A 

Selects the previous Setlist, and loads the first Tone Preset within

B

Selects the next Setlist, and loads the first Tone Preset within

C

Loads the previous Tone Preset within the selected Setlist

D

Loads the next Tone Preset within the selected Setlist

Pedal Wah

Wahs - Adjusts Position knob

Toe Switch

Wahs - On/Off, or Bender effect On/Off

FBV Express MkII Control

POD Farm 2 Pre-configured Global Parameter 

(POD Farm 2 Standalone Only)

Pedal Volume

Adjusts the Mixer Tone A Level and Tone B Level

Pre-configured functions provided in POD Farm 2 by the POD Farm 2-Express.fbv preset settings

• 

A & B footswitches

 - These footswitches select the previous and next correspondingly numbered 

Setlist, respectively. Each also automatically loads the first Tone Preset within the selected Setlist 

(the preset with the number “0” to its left). This allows you to then use the C & D footswitches 

to load Tone Presets within the selected Setlist. 

• 

C & D footswitches

 - These footswitches select the previous and next correspondingly numbered 

Tone Preset within the currently selected Setlist, respectively.

Note that no Setlists exist within POD Farm 2 by default, therefore, the A, B, C & D footswitches will 
not  perform  any  function  until  you  create  Setlists  and  add  Tone  Presets  into  the  Setlists.  Please  see  the 

POD Farm 2 Basic User Guide

 for info on creating and managing Setlists (accessible via the POD Farm 

2 Help button, or from the 

POD Farm Online Help

 site).

• 

Toe Switch

 - As listed in the table above, the Toe Switch may be assigned to toggle a Wah model 

on/off, or the Bender model on/off in some of the Tone Presets within the POD Farm 2 Source