Bosch GWS 14 125 Inox - Инструкция по эксплуатации - Страница 24

 English | 

25

Bosch Power Tools

1 609 929 R00 | (21.4.08)

f

Use extra caution when making a “pocket 
cut” into existing walls or other blind areas. 

The protruding wheel may cut gas or water 
pipes, electrical wiring or objects that can 
cause kickback.

Safety warnings specific for sanding op-

erations

f

Do not use excessively oversized sanding 
disc paper. Follow manufacturers recom-
mendations, when selecting sanding paper. 

Larger sanding paper extending beyond the 
sanding pad presents a laceration hazard and 
may cause snagging, tearing of the disc, or 
kickback.

Safety warnings specific for wire brush-

ing operations

f

Be aware that wire bristles are thrown by 
the brush even during ordinary operation. 
Do not overstress the wires by applying ex-
cessive load to the brush. 

The wire bristles 

can easily penetrate light clothing and/or 
skin.

f

If the use of a guard is recommended for 
wire brushing, do not allow any interfer-
ence of the wire wheel or brush with the 
guard. 

Wire wheel or brush may expand in di-

ameter due to work load and centrifugal forc-
es.

Additional safety warnings

Wear safety goggles.

f

Use suitable detectors to determine if utili-
ty lines are hidden in the work area or call 
the local utility company for assistance. 

Contact with electric lines can lead to fire 
and electric shock. Damaging a gas line can 
lead to explosion. Penetrating a water line 
causes property damage or may cause an 
electric shock.

f

When working stone, use dust extraction. 
The vacuum cleaner must be approved for 
the extraction of stone dust. 

Using this 

equipment reduces dust-related hazards.

f

Use a cutting guide when cutting stone. 

Without sideward guidance, the cutting disc 
can jam and cause kickback.

f

When working with the machine, always 
hold it firmly with both hands and provide 
for a secure stance. 

The power tool is guided 

more secure with both hands.

f

Secure the workpiece. 

A workpiece clamped 

with clamping devices or in a vice is held 
more secure than by hand.

f

Keep your workplace clean. 

Blends of mate-

rials are particularly dangerous. Dust from 
light alloys can burn or explode.

f

Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and 
pull the mains plug when the cable is dam-
aged while working. 

Damaged cables in-

crease the risk of an electric shock.

Functional Description

Read all safety warnings and all in-
structions. 

Failure to follow the 

warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.

While reading the operating instructions, unfold 
the graphics page for the machine and leave it 
open.

Intended Use

The machine is intended for cutting, roughing, 
and brushing metal and stone materials without 
using water.
For cutting metal, a special protection guard for 
cutting (accessory) must be used.
For cutting stone, a special extraction hood for 
cutting with cutting guide (accessory) must be 
used.
With approved sanding tools, the machine can 
be used for sanding with sanding discs.

OBJ_BUCH-611-003.book  Page 25  Monday, April 21, 2008  11:28 AM