Yamaha RX-V563 - Инструкция по эксплуатации - Страница 78

76

 En

Using multi-zone configuration

Operating Zone 2

Press 

R

INPUT

l

 / 

h

 to select the desired input 

source while the ZONE2 indicator is flashing in 
the front panel display.

• Select “TUNER” as the input source to use the TUNER 

features in Zone 2. For details about the TUNER 
operations, see “FM/AM tuning” on page 45.

• Select “V-AUX” as the input source to use iPod 

features in Zone 2. For details about the iPod 
operations, see “Using iPod™” on page 53.

• Select “V-AUX” as the input source to use Bluetooth 

component features in Zone 2. For details about the 
Bluetooth component operations, see “Using 
Bluetooth™ components” on page 55.

Set Zone 2 to the standby mode

Press 

B

ZONE 2 ON/OFF

 to set Zone 2 to the 

standby mode.

y

Press 

C

SYSTEM OFF

 to set the main zone and Zone 2 to the 

standby mode simultaneously.

■

Controlling Zone 2 with the remote 
control

Turning on Zone 2

While pressing and holding  

4

AMP

, press 

G

POWER

.

Operating Zone 2

While pressing and holding 

4

AMP

, press one of 

the input selector buttons (

3

)  to select the 

desired input source of Zone 2.

Setting Zone 2 to the standby mode

While pressing and holding 

4

AMP

, press 

H

STANDBY

 to set ZONE 2 to the standby 

mode.

Operate the following operations after activating the Zone 2 
operation mode.

POWER

AMP

While holding 

down