Yamaha RX-V563 - Инструкция по эксплуатации - Страница 45

USING AUDIO FEATURES

43

 En

English

BA
S

IC

OPERA

T

ION

Use the DIRECT mode to enjoy the high quality sounds of 
the selected source. When the DIRECT mode is activated, 
this unit plays back the selected source with the least 
circuitry.

Press 

Q

DIRECT

 (or press 

4

AMP

 and then 

C

DIRECT

) to select 

“

DIRECT

”

.

• “TONE CONTROL” and “SOUND MENU” (see page 59) 

settings (except for speaker level settings) are not effective.

• The front panel display automatically dims.

y

While DIRECT mode is activated, the front panel display turns on 
momentarily when an operation is performed.

Use this feature to adjust the balance of bass and treble for 
the front left and right speaker channels.

y

Speaker and headphone adjustments are stored independently.

1

Press 

N

TONE CONTROL

 repeatedly to 

select the high-frequency response 
(TREBLE) or the low-frequency response 
(BASS).

2

Press 

O

PROGRAM

l

 / 

h

 repeatedly to 

adjust the high-frequency response 
(TREBLE) or the low-frequency response 
(BASS).

• If you increase or decrease the high-frequency or the 

low-frequency sound to an extreme level, the tonal quality of 
the surround speakers may not match.

• TONE CONTROL is not effective when this unit is in the 

DIRECT mode, or when MULTI CH is selected as the input 
source.

You can adjust the output level of each speaker while 
listening to a music source. This is also possible when 
playing sources input at the MULTI CH INPUT jacks.

This operation will override the level adjustments made in 
“AUTO SETUP” (see page 26) and “SP LEVEL” (see page 61).

1

Press 

4

AMP

 and then press 

6

LEVEL

 on 

the remote control  and then 

7

k

 / 

n

 to select 

the speaker you want to adjust.

y

• Instead of “SB L” and “SB R”, “SUR.B” is displayed if 

“SUR.B L/R SP” is set to either “SMLx1” or “LRGx1” 
(see page 60).

• The available speaker channels differ depending on the 

setting of the speakers.

• When the video monitor is turned on, the “SP LEVEL” 

adjustment menu appears in the video monitor. 

2

Press 

7

l

 / 

h

 to adjust the speaker output 

level.

• Press 

7

h

 to increase the value.

• Press 

7

l

 to decrease the value.

• Control range: –10 dB to +10 dB

3

Press 

6

LEVEL

 to turn off the speaker level 

adjustment display.

Using audio features

Enjoying high quality sound

Notes

Adjusting the tonal quality

Notes

Adjusting the speaker level

Note

Display

Adjusted speaker

FRONT L

Front left speaker

FRONT R

Front right speaker

CENTER

Center speaker

SWFR

Subwoofer

SUR. L

Surround left speaker

SUR. R

Surround right speaker

SB L

Surround back left speaker

SB R

Surround back right speaker