Yamaha RX-V563 - Инструкция по эксплуатации - Страница 44

42

 En

Sound field programs

■

Editing sound fields parameters

You can enjoy good quality sound with the factory default 
parameters. Although you do not have to change the initial 
settings, you can change some of the parameters to better 
suit the input source or your listening room.

1

While listening to a source, press 

4

AMP

and then press 

Q

PARAMETER

.

2

Press 

7

k

 / 

n

 to select the desired parameter 

you want to change.

3

Press 

7

l

 / 

h

 to change the parameter 

value.

You cannot change parameter values when “MEMORY GUARD” 
in “OPTION MENU” is set to “ON” (see page 68).

y

Initial settings are indicated in bold under each parameter.

For Pop/Rock, Hall, Jazz, Game, TV Sports, 
Movie Spacious and Movie Dramatic:

DSP level  

DSP LEVEL

Function:

Adjusts the effect level.

Choices:

MIN, 

MID

, MAX

For 2ch Enhancer and 7ch Enhancer 

Effect level  

EFFECT LEVEL

Function:

Adjusts the effect level.

Choices:

LOW, 

HIGH

For Pro Logic II Music and Pro Logic IIx Music:

Panorama  

PANORAMA

Function:

Sends stereo signals to the surround 
speakers as well as the front speakers for 
a wraparound effect.

Choices:

OFF

, ON

Dimension  

DIMENSION

Function:

Gradually adjusts the sound field either 
towards the front or towards the rear.

Control range: –3 (towards the rear) to +3 (towards the 

front), initial setting is STD (standard).

Center width  

CT WIDTH

Function:

Adjusts the center image from all three 
front speakers to varying degrees. A 
larger value adjusts the center image 
towards the front left and right speakers.

Control range: 0 (center channel sound is output only 

from center speaker) to 7 (center channel 
sound is output only from front left and 
right speakers), initial setting is 3.

For Neo:6 Music

Center image  

C.IMAGE

Function:

Adjusts the front left and right channel 
output relative to the center channel 
more or less dominant as necessary.

Control range: 0.0 to 1.0, initial setting is 0.3.

Note