Zyxel NBG-418N v2 - Инструкция по эксплуатации - Страница 25

 Chapter 3 Connection Wizard

NBG-418N v2 User’s Guide

25

Fig ure  1 4    

Wizard Step 2: Wireless LAN

The following table describes the labels in this screen.

Table 6   Wizard Step 2: Wireless LAN

LA BEL

DESC RIPTIO N

Wireless LAN

Disable the 
wireless radio

Click this check box to disable the WLAN in the NBG-418N v2.

SSID

Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN. 

If you change this field on the NBG-418N v2, make sure all wireless stations use the same SSID in 
order to access the network. 

Channel

The range of radio frequencies used by IEEE 802.11b/g/n wireless devices is called a channel. 

Set the operating frequency/channel depending on your particular region. Select a channel 
from the drop-down list box. The options vary depending on the frequency band and the 
country you are in.

Select 

A uto

 to have the NBG-418N v2 automatically choose the channel with the least 

interference.

Mode

Select the IEEE 802.11 WLAN mode you wish to use on the NBG-418N v2 from the drop-down list.

Channel Width

Select the channel bandwidth you want to use for your wireless network.

Select 

A uto  2 0 / 4 0  MHz

 to allow the NBG-418N v2 to adjust the channel bandwidth to 40 MHz or 

20 MHz depending on network conditions.

Select 

2 0  MHz

 if you want to lessen radio interference with other wireless devices in your 

neighborhood or the wireless clients do not support channel bonding.

Select 

4 0  MHz

 to bond two adjacent radio channels to increase throughput. The wireless clients 

must also support 40 MHz.

Wireless Security

Disable Security

Click this check box to disable security settings for the WLAN.