Zyxel NBG-418N v2 - Инструкция по эксплуатации - Страница 153

 Chapter 23 Troubleshooting

NBG-418N v2 User’s Guide

153

2 3 .5   Wire le ss Pro b le m s

I cannot access the NBG-418N v2 or ping any computer from the WLAN.

1

Make sure the wireless LAN is enabled on the NBG-418N v2.

2

Make sure the wireless adapter on the wireless station is working properly.

3

Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports the 
same wireless standard as the NBG-418N v2.

4

Make sure your computer (with a wireless adapter installed) is within the transmission range of the NBG-
418N v2.

5

Check that both the NBG-418N v2 and your wireless station are using the same wireless and wireless 
security settings.

6

Make sure traffic between the WLAN and the LAN is not blocked by the firewall on the NBG-418N v2. 

7

Make sure you allow the NBG-418N v2 to be remotely accessed through the WLAN interface. Check 
your remote management settings.

• See 

Chapter 6 Wireless LAN

 for more information.

I cannot access the Web Configurator after I switched to a non-router mode.

When you change from router mode to a non-router mode, you must manually give your computer an 
IP address in the range between 192.168.1.3 and 192.168.1.254 as non-router mode has no LAN DHCP 
server.

Refer to 

Appendix D on page 178

 for instructions on how to change your computer’s IP address.