Hitachi CS35Y HTC-CS35Y - Инструкция по эксплуатации - Страница 14

13

English

6.  Check the guide bar and saw chain before starting the 

unit.

◯

  If the guide bar or saw chain is cracked, or the product 

is scratched or bent, do not use the unit.

◯

  Check if the guide bar and saw chain are securely 

installed. If the guide bar or saw chain is broken or 
dislodged, this may result in an accident.

7.  Before starting work, check to ensure the switch does 

not engage unless the lock-o

ff

  button is pressed.

If the unit does not working properly, immediately stop 
using and request repair from your Hitachi Authorized 
Ser vice Center.

8.  Install the saw chain properly, in accordance with the 

instruction manual.

If installed incorrectly, the saw chain will come o

ff

   the 

guide bar and injur y may occur.

9.  Never remove any of the safety devices equipped 

on the chain saw (brake lever, lock-o

ff

  button, chain 

catcher etc.).

In addition, do not alter or immobilize them.

Injur y may occur.

10. In the following cases, switch the unit o

ff

   and ensure the 

saw chain is no longer moving:

◯

  When not in use or being repaired.

◯

  When shifting to a new work location.

◯

  When inspecting, adjusting or replacing the saw chain, 

guide bar, chain case and any other part.

◯

 When re

fi

 lling the chain oil.

◯

  When removing dust etc. from the body.

◯

  When removing obstacles, trash or sawdust generated 

from work from the work area.

◯

  When you take o

ff

  the unit, or when you get away from 

the unit.

◯

  Otherwise, if you sense danger or anticipate risk.

If the saw chain is still moving, an accident may occur.

11.  Work should generally be performed individually. When 

multiple individuals are involved, ensure su

ffi

  cient 

spacing between them.

In particular, when felling standing trees or working on 
a slope, if you anticipate trees falling, rolling or sliding, 
ensure there is no danger to other workers. 

12. Remain more than 15 m away from other people.
 

In addition, when working with multiple persons, remain 
15 m or more apart.

◯

 There is a risk of impact with scatters and other 

accidents.

◯

  Prepare a whistle alert etc. and determine appropriate 

contact method for other workers beforehand.

13. Before felling standing trees, ensure the following:

◯

  Determine a safe evacuation location prior to felling.

◯

  Remove obstacles (e.g., branches, shrubs) in advance.

◯

  Based on a comprehensive evaluation of the state of the 

tree to be felled (e.g., trunk bend, tension of branches) 
and the surrounding situation (e.g., state of adjacent 
trees,  presence  of  obstacles,  terrain,  wind),  decide  on 
the direction in which the standing tree will fall and then 
plan the felling procedure.

Careless felling may result in injur y. 

14. When felling standing trees, ensure the following:

◯

  During work, be ver y careful of the direction in which 

trees fall.

◯

  When working on a slope, ensuring the tree will not roll, 

always work from the uphill side of the terrain.

◯

  When the tree starts falling, switch the unit o

ff

 ,  alert 

the surroundings, and immediately retreat to a safe 
location.

◯

  During work, if the saw chain or guide bar become 

entangled in the tree, switch o

ff

  and use a wedge.

15. During use, if the unit performance deteriorates, or you 

notice any abnormal sound or vibration, immediately 
switch o

ff

  and discontinue use, and return to your 

Hitachi Authorized Ser vice Center for inspection or 
repair.

If you continue using, injur y may occur.

16. If the unit is accidentally dropped or exposed to impact, 

inspect carefully for damage or cracks and ensure there 
is no deformation.

If the unit is damaged, cracked or deformed, injur y may 
occur.

17.  When  transporting  the  unit  by  car,  secure  the  unit  to 

prevent it moving.

There is a risk of accident.

18. Do not switch the unit on while the chain case is 

attached.

Injur y may occur.

19. Ensure there are no nails and other foreign objects in 

the material.

If the saw chain impact on the nail etc., injur y may occur.

20. To avoid the guide bar becoming entangled with the 

material when chopping on a verge or when subject to 
the weight of material while cutting, install a supporting 
platform close to the cutting position.

If the guide bar becomes entangled, injur y may occur.

21. If the unit is to be transported or stored after use, either 

remove the saw chain, or attach the chain cover.

If the saw chain comes into contact with your body, 
injur y may occur.

22. Adequately care for the unit.

◯

  To ensure work can be performed safely and e

ffi

  ciently, 

care for the saw chain to ensure it provides optimal 
cutting performance.

◯

  When replacing the saw chain or guide bar, maintaining 

the body, 

fi

 lling oil etc., follow the instruction manual.

23. Ask the shop to repair the unit.

◯

  Do not modify this product, since it already complies 

with the applicable safety standards.

◯

  Always refer to your Hitachi Authorized Ser vice Center 

for all repairs.

Attempting  to  repair  the  unit  yourself  may  result  in  an 
accident or injur y.

24. When not using the unit, ensure it is properly stored.
 Drain 

o

ff

  the chain oil, and keep in a dr y place out of 

reach of children or a locked location.

25. If the warning label is no longer visible, peels o

ff

  or is 

otherwise unclear, apply a new warning label.

For the warning label, refer to your Hitachi Authorized 
Ser vice Center.

26. When working, if local rules or regulations apply, 

comply with the same.

000Book̲CS30Y̲EE.indb   13

000Book̲CS30Y̲EE.indb   13

2013/04/10   11:12:24

2013/04/10   11:12:24