Sparky TV 1835 - Инструкция по эксплуатации - Страница 6

4

TV 1835 • TV 2040 • TV 2245

EN

General power tool  

safety warnings

WARNING!

Read all safety warnings and 

all instructions. 

Failure  to  follow  the  warnings  and 

instructions  may  result  in  electric  shock,  fire  and/or 

serious injury. 

Save all warnings and instructions for future 

reference.

The term “power tool” in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

1. WORK AREA SAFETY

a)  Keep work area clean and well lit. 

Cluttered or dark 

areas invite accidents.

b) Do not operate power tools in explosive atmos-

pheres, such as in the presence of flammable 

liquids, gases or dust.

 Power tools create sparks 

which may ignite the dust or fumes.

c)  Keep children and bystanders away while operat-

ing a power tool. 

Distractions can cause you to lose 

control.

2. ELECTRICAL SAFETY

a) Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any adapt-

er plugs with earthed (grounded) power tools. 

Un-

modified plugs and matching outlets will reduce risk of 

electric shock.

b) Avoid body contact with earthed or grounded 

surfaces, such as pipes, radiators, ranges and 

refrigerators. 

There is an increased risk of electric 

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet condi-

tions. 

Water entering a power tool will increase the 

risk of electric shock.

d) Do not abuse the cord. Never use the cord for car-

rying, pulling or unplugging the power tool. Keep 

cord away from heat, oil, sharp edges or moving 

parts. 

Damaged or entangled cords increase the risk 

of electric shock.

e) When operating a power tool outdoors, use an 

extension cord suitable for outdoor use. 

Use of a 

cord suitable for outdoor use reduces the risk of elec-

tric shock.

f)  If operating a power tool in a damp location is 

unavoidable, use a residual current device (RCD) 

protected supply. 

Use of an RCD reduces the risk of 

electric shock.

3. PERSONAL SAFETY

a) Stay alert, watch what you are doing and use 

common sense when operating a power tool. Do 

not use a power tool while you are tired or under 

the influence of drugs, alcohol or medication. 

A 

moment of inattention while operating power tools 

may result in serious personal injury.

b) Use personal protective equipment. Always wear 

eye protection. 

Protective equipment such as dust 

mask, non-skid safety shoes, hard hat, or hearing 

protection used for appropriate conditions will reduce 

personal injuries.

c)  Prevent unintentional starting. Ensure the switch 

is in the off-position before connecting to power 

source and/or battery pack, picking up or carry-

ing the tool. 

Carrying power tools with your finger 

on the switch or energising power tools that have the 

switch on invites accidents.

d) Remove any adjusting key or wrench before 

turning the power tool on. 

A wrench or a key left 

attached to a rotating part of the power tool may result 

in personal injury.

e) Do not overreach. Keep proper footing and bal-

ance at all times. 

This enables better control of the 

power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or 

jewellery. Keep your hair, clothing and gloves 

away from moving parts. 

Loose clothes, jewellery 

or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust 

extraction and collection facilities, ensure these 

are connected and properly used. 

Use of dust col-

lection can reduce dust-related hazards.

4. POWER TOOL USE AND CARE

a)  Do not force the power tool. Use the correct pow-

er tool for your application. 

The correct power tool 

will do the job better and safer at the rate for which it 

was designed.

b) Do not use the power tool if the switch does not 

turn it on and off. 

Any power tool that cannot be 

controlled with the switch is dangerous and must be 

repaired.

c) Disconnect the plug from the power source and/

or the battery pack from the power tool before 

making any adjustments, changing accessories, 

or storing power tools. 

Such preventive safety 

measures reduce the risk of starting the power tool 

accidentally.

d) Store idle power tools out of the reach of children 

and do not allow persons unfamiliar with the pow-

er tool or these instructions to operate the power 

tool. 

Power tools are dangerous in the hands of un-

trained users.

e)  Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and 

any other condition that may affect the power 

tool’s operation. If damaged, have the power tool 

repaired before use.

 Many accidents are caused by 

poorly maintained power tools.

f)  Keep cutting tools sharp and clean. 

Properly main-

tained cutting tools with sharp cutting edges are less 

likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. 

in accordance with these instructions, taking into 

account the working conditions and the work to be 

performed.

 Use of the power tool for operations dif-

ferent from those intended could result in a hazardous 

situation.

pages-TV-1835-2040-2245-2017.indd   4

11.5.2017 г.   14:42:50