Bosch GWS GWS 24 230 LVI - Инструкция по эксплуатации - Страница 24

 English | 

25

Bosch Power Tools

1 609 929 L56 | (4.6.08)

f

Use extra caution when making a “pocket 

cut” into existing walls or other blind areas. 

The protruding wheel may cut gas or water 

pipes, electrical wiring or objects that can 

cause kickback.

Safety warnings specific for sanding op-

erations

f

Do not use excessively oversized sanding 

disc paper. Follow manufacturers recom-

mendations, when selecting sanding paper. 

Larger sanding paper extending beyond the 

sanding pad presents a laceration hazard and 

may cause snagging, tearing of the disc, or 

kickback.

Safety warnings specific for wire brush-

ing operations

f

Be aware that wire bristles are thrown by 

the brush even during ordinary operation. 

Do not overstress the wires by applying ex-

cessive load to the brush. 

The wire bristles 

can easily penetrate light clothing and/or 

skin.

f

If the use of a guard is recommended for 

wire brushing, do not allow any interfer-

ence of the wire wheel or brush with the 

guard. 

Wire wheel or brush may expand in di-

ameter due to work load and centrifugal forc-

es.

Additional safety warnings

Wear safety goggles.

f

Use suitable detectors to determine if utili-

ty lines are hidden in the work area or call 

the local utility company for assistance. 

Contact with electric lines can lead to fire 

and electric shock. Damaging a gas line can 

lead to explosion. Penetrating a water line 

causes property damage or may cause an 

electric shock.

f

When working stone, use dust extraction. 

The vacuum cleaner must be approved for 

the extraction of stone dust. 

Using this 

equipment reduces dust-related hazards.

f

Use a cutting guide when cutting stone. 

Without sideward guidance, the cutting disc 

can jam and cause kickback.

f

When working with the machine, always 

hold it firmly with both hands and provide 

for a secure stance. 

The power tool is guided 

more secure with both hands.

f

Secure the workpiece. 

A workpiece clamped 

with clamping devices or in a vice is held 

more secure than by hand.

f

Keep your workplace clean. 

Blends of mate-

rials are particularly dangerous. Dust from 

light alloys can burn or explode.

f

Never use the machine with a damaged ca-

ble. Do not touch the damaged cable and 

pull the mains plug when the cable is dam-

aged while working. 

Damaged cables in-

crease the risk of an electric shock.

Functional Description

Read all safety warnings and all in-

structions. 

Failure to follow the 

warnings and instructions may re-

sult in electric shock, fire and/or se-

rious injury.

While reading the operating instructions, unfold 

the graphics page for the machine and leave it 

open.

Intended Use

The machine is intended for cutting, roughing, 

and brushing metal and stone materials without 

using water.

For cutting metal, a special protection guard for 

cutting (accessory) must be used.

For cutting stone, a special extraction hood for 

cutting with cutting guide (accessory) must be 

used.

With approved sanding tools, the machine can 

be used for sanding with sanding discs.

OBJ_BUCH-429-005.book  Page 25  Wednesday, June 4, 2008  11:55 AM